Would a gunsmith like to help?

Discussion in 'Gunsmithing Forum' started by froggyjf, May 4, 2011.

  1. froggyjf

    froggyjf New Member

    25
    0
    0
    My brother has a Raven arms mp-25. He cleaned it the other day, and when he put it back together he put the firing pin and spring back into the gun in the wrong order and can't get the gun back apart.
    If u click on the link he put part numbers 104 and 121 in the opposite order as they are shown.


    Thanks, Brian


    http://www.gunpartscorp.com/images/schematics/Raven_MP25P25_schem.jpg
     
  2. c3shooter

    c3shooter Administrator Staff Member

    21,451
    572
    113
    You SHOULD be able to press part 105 forward with something like a ball point pen, and lift the rear of the slide slightly.
     

  3. froggyjf

    froggyjf New Member

    25
    0
    0
    I had to pull the trigger while doing the other steps but it worked, thanks
     
  4. canebrake

    canebrake New Member

    21,833
    3
    0
    Another satisfied customer!

    Kudos C3. (How's your head?)
     
  5. FaTmAn

    FaTmAn New Member

    346
    0
    0
    lmao and i was just going to say pull the trigger while doing what c3 said darn you guys are fast
     
  6. c3shooter

    c3shooter Administrator Staff Member

    21,451
    572
    113
    You're welcome. Head is OK- should be at the point of not frightening small children in a day or so.