world famous bobski mystery thing, pic #294

Discussion in 'The Club House' started by bobski, May 7, 2013.

  1. bobski

    bobski Well-Known Member Sponsor

    6,345
    26
    48
    im thinking something to do with a jig saw bit.....? the key pin moves very easily.
     

    Attached Files:

  2. towboater

    towboater Active Member

    4,578
    19
    38

  3. c3shooter

    c3shooter Administrator Staff Member

    21,335
    192
    63
    Blade holder, hacksaw. Blade fits in slot, pin thru hole in blade, threaded end of the shank goes thru frame of saw, wingnut tightens on shaft, pulling blade taut.

    hacksaw.jpg
     
    Last edited: May 7, 2013
  4. bobski

    bobski Well-Known Member Sponsor

    6,345
    26
    48
    but the other end is smooth like it chucks up.
     
  5. c3shooter

    c3shooter Administrator Staff Member

    21,335
    192
    63
    Enlarging pic. sure looks like worn threads on the skinny end.
     
  6. 303tom

    303tom Well-Known Member

    5,171
    78
    48
    C3 is right it goes to a hack saw.................
     
  7. hiwall

    hiwall Well-Known Member

    4,269
    22
    48
    Looks way too big for a hack saw, maybe a bow saw? Though I am not convinced it is for a saw.
     
  8. bobski

    bobski Well-Known Member Sponsor

    6,345
    26
    48
    the end closest to the handle would have to have a means to thread into the handle or stay stationary. and the other end would have to have a wing nut to give it tension.
    im not convinced.
     
  9. willshoum

    willshoum New Member

    5,417
    0
    0
    Saw................

    How you say reciprecating.......Used in cutting metal in machine shops, allso known as hack saw...........
     
  10. bobski

    bobski Well-Known Member Sponsor

    6,345
    26
    48
    jig saw?.........
     
  11. bobski

    bobski Well-Known Member Sponsor

    6,345
    26
    48
    bingo...hack saw. you should have seen how huge the saw handle was.
     
  12. MisterMcCool

    MisterMcCool Well-Known Member Supporter

    12,820
    127
    63
    Identified by c3shooter
     
  13. willshoum

    willshoum New Member

    5,417
    0
    0
    Not a hand held hack saw, the blades I'm speaking of are the ones I use to make knives with. Whats the width and depth of the groove..........