Wolf .223 Ammo

Discussion in 'Ammunition & Reloading' started by ARnoob, Apr 13, 2008.

  1. ARnoob

    ARnoob New Member

    443
    0
    0
    Gentlemen, I need your help, yet again. I have about 400 rds. of Wolf 62 gr. FMJ (black box) ammo. I tried shooting it in my WASR 3. I had a gunsmith replace the springs on the extractor. It was a jam-o-matic, but now shoots fine (weak double coil extractor spring).

    Well, it shoots REM UMC 55 gr. non-stop, without any issues, but after about 60 rds. of Wolf 62 gr. FMJ (black box) ammo, I experience nothing but FTE's after every round! A guy at the range today said something about adjusting the gas block/port?? Any clue as to what he was talking about or what I should do? Thanks. :confused:
     
  2. scoutman

    scoutman New Member

    57
    0
    0
    Not sure as to the gas block adjustment. Most FTF and FTE problems in the WASR-3 stem from bad magazines. I would reccomend picking up some Wieger Magazines. They are about the only reliable mags for the 5.56 Ak's. FWIW, You can get 5.56 ammo (Reloads from DRS in LC and/or WIN brass) for not much more than you pay for Wolf. It's cleaner, more accurate, made in America, and is reloadable.

    http://ammunitiontogo.com/catalog1/...-223-drs-55gr-fmj-ammo&cName=223-556-fmj-ammo
     

  3. ARnoob

    ARnoob New Member

    443
    0
    0
    Thanks Scoutman. I currently use Weiger mags and the Romanian version of Weiger mags. The both feed great, but it's the Wolf ammo. I never heard of adjusting the "bleeding" of the gas. He thought it would definitely help.
     
    Last edited: Apr 14, 2008
  4. RL357Mag

    RL357Mag New Member

    3,250
    0
    0
    My RRA and DPMS AR's instruction manuals both warn against using Wolf or any other steel cased laquer-coated ammo. The DPMS manual went on to warn against Chinese, Israeli, Portugese, and a few other foreign makes. They specifically mention a problem caused by the laquer when it heats up and then gets pushed into the chamber pores for that brief millisecond during combustion when the case expands and grips the chamber. It can cause extraction problems, and stuck cases, as well as a build-up to form in the chamber which will eventually cause all kinds of problems. I won't use steel cased ammo in either gun after reading that warning. It would void the warranty.
     
  5. jeepcreep927

    jeepcreep927 New Member

    1,105
    0
    0
    I have exactly the problems that 357mag mentioned. I have also had about a half dozen case head seperations about 5 years ago with Wolf. I have not shot it in a semi auto since. Steel cased, laquered ammo seems to be nothing but trouble in a semi auto.
     
  6. ARnoob

    ARnoob New Member

    443
    0
    0
    Thanks guys. I returned the WASR 3 and bought a Springfield XD 45. I just got sick of dealing with the WASR 3. Anyway, I'm looking forward to firing the XD!!! Thanks for your help! ;)