Western field 12g

Discussion in 'General Shotgun Discussion' started by gdog997, Jan 27, 2014.

  1. gdog997

    gdog997 New Member

    1
    0
    0
    Inherited western field xnh 565b which through research have found it to be a Noble 65. Have disassembled for cleaning and can't get it back together, I have a schematic but still having trouble with a tiny, one turn spring with a 90 bend on one end. If anyone has any advice I would be most grateful.
     

    Attached Files:

  2. wittmeba

    wittmeba New Member

    1,097
    1
    0
    Try to Google instructions for assembly of Western Field 565B shotgun - see what you get

    Here is one - I haven't view but you can.
    [ame]http://www.youtube.com/watch?v=eZZ-kQQ2sf0[/ame]
     

  3. John_Deer

    John_Deer New Member

    6,624
    1
    0
    For future reference, you only have to field strip a gun for maintenance. Field stripping is just tearing the gun down to it's groups of components. Tearing down the trigger group is not good for a inexpensive shotgun. It is very easy to strip out the holes for the roll pins.