Weaver rings for a Zeiss scope

Discussion in 'Optics & Mounts' started by Jagermeister, May 4, 2013.

  1. Jagermeister

    Jagermeister New Member

    6,811
    0
    0

    Attached Files:

    • 020.jpg
      020.jpg
      File size:
      30.5 KB
      Views:
      327
  2. Txhillbilly

    Txhillbilly Active Member

    4,435
    28
    38
    For a proper cheek weld on most AR style weapons,High or Extra High rings usually work. Using lower rings you have to get far down on the stock,but it all depends on what you feel comfortable with.
     

  3. Triumphman

    Triumphman Active Member

    1,006
    9
    38
    I can tell you right now, that High to X-high Rings will be needed, due to the 50mm Objective.
    Now, if Scope has A/O also, even taller Rings are gonna be needed.
     
  4. gunnut07

    gunnut07 New Member

    944
    0
    0
    High rings should be about right. I went with lowers rings on one AR to see if accuracy was effected. It sure was effected it sucked because being a slightly FLUFFY guy I had to smash my face into the stock that it was uncomfortable to shoot.

    I would get a set of high SWFA tactical rings or Burris P.E.P.R. mount.
     
  5. John_Deer

    John_Deer New Member

    6,624
    1
    0
    You will need a high ring for a 50mm objective. Make sure you sight the rifle in at 100 yards or further. If you sight it in at 50 yards it will shoot high at 100 yards.
     
  6. antikythera

    antikythera New Member

    48
    0
    0
    heya! 1 inch high rings in matte would go great with this Zeiss scope. I recommend warne rings.
     
  7. clearwaterken

    clearwaterken New Member

    18
    0
    0
    Way to nice of a setup to put weaver rings on. The Burris would be my choice if your on a budget or save up a day or two and go with a NF Unimount. One of my personal favs. 20 MOA taper and ultra rigid, like a roll cage around your scope. My AR fell off my quad at 30 with a Unimount, and the impact jacked up the anodizing but no kidding, no loss of zero. Even had to replace the trigger guard lol.