weatherby model 92 extractor problems

Discussion in 'General Shotgun Discussion' started by duddie10, Jul 31, 2013.

  1. duddie10

    duddie10 New Member

    517
    0
    0
    Well thanx to all the input from you guys and gals on how to get a stuck choke out of the weatherby it shoots like a dream. Now what i noticed when shooting it this time the gun had a real hard time extracting the fired shell. I already have a new extractor and spring put in and the gun was well cleaned and oiledbefore i left. I tried the ammo im my mossberg 835 and saiga 12. They both cycle very well with it. The problem is i have to really jam on the slide to get it to open a few shells i had to place the buttof the rifle on the ground and use to hands to get it to open up. Any ideas? Thanx guys and gals.
     
  2. bobski

    bobski Well-Known Member Sponsor

    6,347
    26
    48
    have a smith check your chamber tolerences and headspace. if its worn, then youll know why someone got rid of it.
     

  3. hiwall

    hiwall Well-Known Member

    4,269
    22
    48
    Feel the chamber with your finger. It should be smooth like glass. Often they get cruded up and it causes hard extraction.
     
  4. duddie10

    duddie10 New Member

    517
    0
    0
    The chamber feels good. I also tryed to do a real good inspectuon with a bore light and an eye loop. I think im guna have to have a smith take a look at it.

    ForumRunner_20130803_084409.jpg