Tuning up colt diamond back revolver

Discussion in 'Gunsmithing Forum' started by Strikingeagle, Jul 30, 2012.

  1. Strikingeagle

    Strikingeagle New Member

    3
    0
    0
    Does any member know how to lower the trigger pull on Colt Diamond back

    Striking Eagle
     
  2. danf_fl

    danf_fl Retired Supporter

    12,369
    57
    48
    Care must be taken not to reduce the hammer too much that misfires occur.

    One way is to replace the internal springs (it probably needs that anyways).

    There should be reduced power springs available. I do not encourage cutting springs.
     

  3. Strikingeagle

    Strikingeagle New Member

    3
    0
    0
    dang fl

    Hi dang

    Thanks for the in put I have done this on other revolvers but can not find any part for the Colt Diamond back that would reduce tigger pull or action wolf do not sell any spring kits for the Diamond Back do you know who does

    Eagle
     
  4. danf_fl

    danf_fl Retired Supporter

    12,369
    57
    48
  5. Nighthawk63

    Nighthawk63 New Member

    92
    0
    0
    Trigger pull

    Do not cut springs. There are different spring tensions that you can purchase for a small amount.
     
  6. St8LineGunsmith

    St8LineGunsmith New Member

    711
    0
    0
    ya a two pound spring is available through Midway USA or Brownells as well as a number of other on line gun parts vendors.
     
    Last edited: Aug 4, 2012