A user on another forum was gracious enough to send me some 180 gr Federal HST bullets, which I loaded over 11.2 gr of AA#7. 10mm HST hand load: [ame="http://www.youtube.com/watch?v=UrXoG4N7ySI"]http://www.youtube.com/watch?v=UrXoG4N7ySI[/ame] 9mm Federal 115 gr HST: [ame="http://www.youtube.com/watch?v=kwjN41tBcM4"]http://www.youtube.com/watch?v=kwjN41tBcM4[/ame] Aguila .22lr 40 gr Interceptor: [ame="http://www.youtube.com/watch?v=BZjCsYTBbf0"]http://www.youtube.com/watch?v=BZjCsYTBbf0[/ame] I also tested the 10mm PPU 180 gr JHP bullets over a hand load as well as 155 gr TAC-XP. I wasn't able to get good pics of the wound channels so I decided not to post the video but here are the numbers and a pic of both: I pulled the PPU 180 gr and loaded them right back into their own primed cases over 11.2 gr of AA#7, which generated 1,194 fps. It expanded to 0.668", max, and 0.617" min. Retained weight was 172.5 gr. Unfortunately, it curved down a bit and rode along the table, coming to rest at about 18 3/4". I don't believe this to be the real penetration depth, though. I also shot a 155 gr TAC-XP loaded over 8.2 gr of 800-X. That generated 1,192 fps and penetrated 14.2". Retained weight was 154.8 gr. Max expansion was 0.759" and min was 0.481". I couldn't get any good pictures of the wound track so I decided not to post a video but I consider the numbers to be accurate.