Thinking of changing trigger spring

Discussion in 'Glock Forum' started by flw, Apr 23, 2012.

  1. flw

    flw New Member

    26
    0
    0
    My G23 Gen 4 comes with 5.5 lb trigger spring. To reduce barrel drop, I'm thinking of change to the 3.5 lb trigger spring.

    Has anyone done this and what are your thoughts? Also what did it cost you if you had someone do it for you?

    After the first or second mag is when I see my shots starting to drop.
     
  2. dustinoif3

    dustinoif3 New Member

    175
    0
    0
    I would change the connector before I would change the spring. I think you would get the most for your money. They are usually 20 bucks. I've had good luck with ghost brand. Easy to put in. You can do it yourself. YouTube has some good videos
     

  3. Mongo

    Mongo Active Member Supporter

    1,549
    10
    38
    Glock Trigger

    I have a 17 & a 22. I have installed the "Ghost 3.5lb " trigger kit in both. The kit comes with the connector & three springs and is drop in installation. There is a video on Utube to help. They also make a trigger connector that has to be fitted if you want to work with it.
    The improvement was a smooth lighter pull and shorter reset. If you don't like it, it's very easy to change back.
    When ever I work on a semi auto trigger, I load only two rounds in the magazine for test firing.
    I read somewhere that Glock was/is offering a 3.5 lb connector.