The Good Bad & Ugly shops

Discussion in 'The Club House' started by OLD Ron, Apr 17, 2019.

  1. OLD Ron

    OLD Ron Well-Known Member

    2,310
    5,293
    113

    Every village has an idiot ....... the good bad shops has rifling ! :p
     
  2. OLD Ron

    OLD Ron Well-Known Member

    2,310
    5,293
    113
    Nice week it sounds like for outside things to work at .:cool:
    To bad the pressing things I have are inside things to do ...... may be able to mix them in with outside a bit .
    I need to run to shop 2 & do some measuring for pipes I will be needing & drag them out there . All the couplings & reducers should be fun too . With no water in pluming isn't bad to do ..... with crap & water in ..... not so much fun ! :p When I get to wiring the place that will get real interesting with outlets & switches all over the place . :eek: This will be another dream & build as I go type project .:rolleyes:
     

  3. dango

    dango Well-Known Member Lifetime Supporter

    16,488
    12,330
    113
    I disagree ! Look at "rifling so " as a a rash that does no harm , but does build immunity ! :D
    A goo d guy !
     
    towboater, ellis36 and Rifling82 like this.
  4. OLD Ron

    OLD Ron Well-Known Member

    2,310
    5,293
    113
    It was a really mixed bag of things today . :p
    Did some shopping ...... a service call ( went really well ) ..... shop 3 & put 2 more storm door handles on ..... cleaned up the project trailer I drag around ..... picked up a couple more tubs for treasures ..... some food .... made a few phone calls . The door place sent me a bill so I called to ask when what I ordered would be done right & why my bill was off by 2k ? answer was ..... locks are in .... seals & locks will be on tomorrow ...... 2k was a mistake & was taken off my bill . :rolleyes:
    Measured up pipe & conduit needs for underground ...... that will be a truck full .
    Oh & the dented up corner ..... that was just a bad dream ..... it's all fine ! :p
    corner dream.JPG
     
    towboater, dango and Rifling82 like this.
  5. Rifling82

    Rifling82 Well-Known Member Supporter

    5,946
    10,603
    113
    I ordered a gun today :)
     
  6. OLD Ron

    OLD Ron Well-Known Member

    2,310
    5,293
    113
    You don't know what you ordered ?
    Just called & said send me one ?
    :p
     
    towboater, dango and Rifling82 like this.
  7. Rifling82

    Rifling82 Well-Known Member Supporter

    5,946
    10,603
    113
    I told the wife I’m coming up to see you sometime Ron
     
    towboater and dango like this.
  8. OLD Ron

    OLD Ron Well-Known Member

    2,310
    5,293
    113
    Take care ...... she is probably planning to move while you are gone ! :p
     
    towboater, dango and Rifling82 like this.
  9. Rifling82

    Rifling82 Well-Known Member Supporter

    5,946
    10,603
    113
    Lol.... Rock Island 1911 in 9mm... still on the look out for a Colt 1911 in 45, not sure if I want a government model or competition
     
    towboater, dango and OLD Ron like this.
  10. Rifling82

    Rifling82 Well-Known Member Supporter

    5,946
    10,603
    113
    She ain’t goin nowhere, she’ll just tell me to stay.... ya got room in that new shop for me ?
     
    towboater and dango like this.
  11. OLD Ron

    OLD Ron Well-Known Member

    2,310
    5,293
    113
    Why make tough choices like that ? ...... buy both & be happy :p
    I like all my 45s ...... just hate chasing brass around .
     
    dango and Rifling82 like this.
  12. OLD Ron

    OLD Ron Well-Known Member

    2,310
    5,293
    113
    lol You may need to build one for yourself !
    Don't even have a cement floor yet . :(
     
    dango and Rifling82 like this.
  13. Rifling82

    Rifling82 Well-Known Member Supporter

    5,946
    10,603
    113
    I just might do that.... I’m sure you have a bunch of Colts
     
    towboater, dango and OLD Ron like this.
  14. OLD Ron

    OLD Ron Well-Known Member

    2,310
    5,293
    113
    Not to many ..... I think when I had time I was shooting more S&W than the Colts . The desert eagle is one I like to shoot a lot . :)
    Since I bought that Ruger 45 acp I have been burning up some old ammo that didn't work in the 45s .
     
    towboater, dango and Rifling82 like this.
  15. OLD Ron

    OLD Ron Well-Known Member

    2,310
    5,293
    113
    You making any headway on your casting & loading project there ?
     
    dango likes this.
  16. OLD Ron

    OLD Ron Well-Known Member

    2,310
    5,293
    113
    That just gave me a brainfart idea ....... make the rest area in shop 3 - 4 into a back to the 1800s area ! :) I already have the things for it including a chamber pot ! :p
     
    Oldoutlaw, Rifling82 and dango like this.
  17. OLD Ron

    OLD Ron Well-Known Member

    2,310
    5,293
    113
    In the 70s here today ....... now that's outside time ! :)
    Dentist appointment at 11:30 is going to be tough to plan shop 2 things around . Guess I can sit around & pay bills or sort stuff . :confused:
    Yard work needs doing but then I really get messed up & hate to go with grass all over me . :eek: Maybe go buy a truck load of pipe for the shop . :) I need to call a guy with a mini hoe & just get that all dug out & can move along . Renting a trencher would be about the same money so let someone else do the work . :p ( if I can get one to show up & work ) That is always the joker in the deck .
    Still thinking on that 1800s theme for the shop ! :) Tough to mix in a juke box & ceiling fans with that :p
     
    Oldoutlaw, ellis36 and dango like this.
  18. OLD Ron

    OLD Ron Well-Known Member

    2,310
    5,293
    113
    Was a really nice day here in wonderland ! :)
    Dentist went well ...... paper work caught up ...... no call back on the doors or the mini hoe . Maybe tomorrow will have better results . o_O
    It is really nice to have doors & windows open ! :)
    Oh ya the cement guy didn't call too . :rolleyes:
    Two or the 3 no call backs can be replaced with people that want to work .
    So tonight is goof off time ! :p
    May do a few things or watch old movies until bed . :)
    May mess around in the rescue room & try to make some space to work in again . Will need to move tubs of knives out ..... but not back to the attic to make some room to get around .
    If the frame of a 1911 is Essex arms & the slide is a Colt would you call it a Essex ..... Colt ..... or 1/2 breed Essex ? :confused:
     
    Oldoutlaw likes this.
  19. Rifling82

    Rifling82 Well-Known Member Supporter

    5,946
    10,603
    113
    I’ve been watching a lot of westerns lately
    Do you have a frame and slide you’re putting together or did you buy it that way?
     
    towboater and OLD Ron like this.
  20. OLD Ron

    OLD Ron Well-Known Member

    2,310
    5,293
    113
    It came that way . If I recall it belonged to a master shooter that my dad knew . He had a smith do the work or he did it himself . When I was shooting a lot it then came my way . I never changed a thing on it . I just tucked it away & used the pistols I had tuned up . Have had that one a really long time .
     
    towboater and Rifling82 like this.