Taurus judge problem

Discussion in 'Revolver Handguns' started by elfmdl, Nov 29, 2012.

  1. elfmdl

    elfmdl New Member

    401
    0
    0
    Okay I have had this pistol for several years and there is a serious problem with it. This is the second time that this pistol has done this. When I shot some .45 colts through it one got stuck in the barrel. Is there a malfunction with the pistol that could cause this.
     
  2. danf_fl

    danf_fl Retired Supporter

    12,369
    57
    48
    What ammo? Reloads or factory?
    If the firing pin hit the primer and there is not enough propellent to push the bullet through the barrel, I would suspect ammo.
     

  3. GaryGlock

    GaryGlock New Member

    684
    3
    0
    I think the biggest problem your having, is you bought a Taurus! If the round is getting stuck in the barrel that sounds pretty dangerous and I wouldn't keep firing it.
     
  4. elfmdl

    elfmdl New Member

    401
    0
    0
    They are reloads. But I know that theses were loaded correctly because I double checked all of the power charge twice just to make sure.
     
  5. elfmdl

    elfmdl New Member

    401
    0
    0
    And I am getting rid of it
     
  6. danf_fl

    danf_fl Retired Supporter

    12,369
    57
    48
    I would try it first with factory loads.
    Could you provide us the load data?
     
  7. elfmdl

    elfmdl New Member

    401
    0
    0
    Bullet: hornady XTP 250 grain
    Powder: unique
    Powder charge: 7.0 grains
    Case length: 1.275
    OAL: 1.60
     
  8. danf_fl

    danf_fl Retired Supporter

    12,369
    57
    48
    7.8 gr is max using the CCI300 primer.
    What primer are you using?
     
  9. HOSSFLY

    HOSSFLY New Member

    6,932
    0
    0
    Squibs are NOT a fault of a gun ---any gun--
     
  10. kfox75

    kfox75 Well-Known Member Supporter

    7,310
    267
    83
    Gary, a fail to fire, a hot load, and a squib (round gets stuck in the barrel) are not the fault of the firearm. It usually indicates a problem with the ammo. If you have nothing helpful to add, please don't add it. It will keep you out of trouble, and the mods won't have to give you a "vacation." Lets all try to be nice, and not be mean with our opinions please.

    OP. I would also try factory ammo before condeming the gun. The infornation you gave for your handloads is good, but as another post said, we need to know what the primers are to ttry and diagnose the problem.
     
  11. elfmdl

    elfmdl New Member

    401
    0
    0
    The primers that I use are CCI300
     
  12. GaryGlock

    GaryGlock New Member

    684
    3
    0
    Ok thanks dad.
     
  13. danf_fl

    danf_fl Retired Supporter

    12,369
    57
    48
    I still suggest the you try factory ammo.
    If factory ammo does the same thing, then I would get back with Taurus.

    (I would not mention "reloads" if the user's manual prohibits their use)