Talk about PISSED OFF

Discussion in 'General Rifle Discussion' started by PrimePorkchop, Jan 30, 2013.

Page 1 of 4
  1. Jan 30, 2013 #1
    PrimePorkchop

    PrimePorkchop New Member

    1,743
    0
    0
    I bought a new sling mount plate for my Colt a while back, and just now got around to buying an AR15 tool to put it on.

    I went to my LGS to get the Ar15 tool, and while I was there, the guy offered to switch it out for me since he has a gun vice and, as he put it, could easily switch it out since he's done so many.

    Look at this ****ing scratch. :mad::mad::mad::mad::mad::mad::mad::mad::mad:


    So not only did it take him too long, but he scratched the piss out of my rifle.

    I can't even begin to tell you how livid I was/am

    But that wasn't what REALLY pissed me off. It was his reaction to the mistake:

    "Sorry bro, that was already there, have a good day"


    EDIT: I realize it might be hard to tell fromt hat shot because of the flash - but it's right there on the castle nut
     

    Attached Files:

    Last edited: Jan 31, 2013
    PrimePorkchop, Jan 30, 2013
    PrimePorkchop, Jan 30, 2013
  3. Jan 30, 2013 #2
    CHLChris

    CHLChris New Member

    2,523
    0
    0
    Really? I'd be unhappy, too, but at least it wasn't your receiver. Just call it learning a lesson about that LGS and that guy's work ethic.
     
    CHLChris, Jan 30, 2013
    CHLChris, Jan 30, 2013

  5. Jan 30, 2013 #3
    Squawk

    Squawk New Member

    864
    0
    0
    I can't see the scratch. Glare makes it hard. You should have talked to the manager or owner. I would have caused a scene like no other.
     
    Squawk, Jan 30, 2013
    Squawk, Jan 30, 2013
  6. Jan 30, 2013 #4
    PrimePorkchop

    PrimePorkchop New Member

    1,743
    0
    0
    I'll be going back on Saturday when I know the owner is going to be there.

    They'll be replacing it and making amends or a scene there will be :rolleyes:
     
    PrimePorkchop, Jan 30, 2013
    PrimePorkchop, Jan 30, 2013
  7. Jan 30, 2013 #5
    AR10

    AR10 New Member

    2,264
    0
    0
    The nut can be replaced. Go in like a gentleman, and all will be made right.

    In the current light, we do not need to be making any waves, or the impression we might be.

    Remain calm, and the store owner will make it AOK. The guy you worked with, has a family and milk to buy. No need making things ruff for him over a scratch.
     
    Last edited: Jan 30, 2013
    AR10, Jan 30, 2013
    AR10, Jan 30, 2013
  8. Jan 30, 2013 #6
    Cattledog

    Cattledog New Member

    1,462
    0
    0
    LOL. wow...I mean sorry dude. My advice is to learn your own rifle so you can scratch it yourself. Trust me, it's waaay less infuriating.

    But yeah, give em hell if you gave them money for a botch job.
     
    Cattledog, Jan 30, 2013
    Cattledog, Jan 30, 2013
  9. Jan 30, 2013 #7
    winds-of-change

    winds-of-change The Balota's Staff Member

    29,443
    299
    83
    I don't see a scratch, either. But I don't really know where to look, either.
     
    winds-of-change, Jan 30, 2013
    winds-of-change, Jan 30, 2013
  10. Jan 30, 2013 #8
    Cattledog

    Cattledog New Member

    1,462
    0
    0
    It's on the castle nut. Actually a pretty common place to get f'd up
     
    Cattledog, Jan 30, 2013
    Cattledog, Jan 30, 2013
  11. Jan 30, 2013 #9
    dog2000tj

    dog2000tj New Member

    8,176
    2
    0
    Be pissed at the guy sure but don't go lose any sleep over it ... it's just a scratch :eek: It's not like it will affect the function of your rifle ;)
     
    dog2000tj, Jan 30, 2013
    dog2000tj, Jan 30, 2013
  12. Jan 30, 2013 #10
    PrimePorkchop

    PrimePorkchop New Member

    1,743
    0
    0
    I know how to do it myself :cool:

    But I went in to buy the tool from them, and we were talking, brought up needing to switch it out, and he offered to do it for me.

    Still, lesson learned, I wont let others operate on my rifle again.

    It's not a huge deal in the big scheme of things - and im not pissed off about the scratch - i'm pissed off about the "sorry bro, it was already there"

    I'm pissed off that all he had to do was say "Damn man im sorry, here's a new castle nut" instead he **** his pants and couldn't man up to it, calling me a liar and saying it was already there.


    Here's a better perspective.
     

    Attached Files:

    PrimePorkchop, Jan 30, 2013
    PrimePorkchop, Jan 30, 2013
  13. Jan 30, 2013 #11
    Cattledog

    Cattledog New Member

    1,462
    0
    0
    DUDE! you don't f**king get it! th....alright Im getting belligerent. Always better to work on and scratch your own rifle. Just sayin....


    k, im done now
     
    Cattledog, Jan 30, 2013
    Cattledog, Jan 30, 2013
  14. Jan 30, 2013 #12
    AR10

    AR10 New Member

    2,264
    0
    0
    I borrowed your signature idea! Thank You!
     
    AR10, Jan 30, 2013
    AR10, Jan 30, 2013
  15. Jan 30, 2013 #13
    PrimePorkchop

    PrimePorkchop New Member

    1,743
    0
    0
    As I said earlier, it's not about the scratch. It's about his immature response to the scratch.

    "Sorry bro that was already there" is not a sufficient response when you screw something up.

    I accept responsibility - it's my rifle - and i'll NEVER make that mistake again. But he was my LGS and I trusted him. My bad.

    He still could have, at the very least, said come back in and talk to __________ he'll be here Saturday.

    Instead he called me a liar and said it was my fault.

    If he has milk to buy he shouldn't act like a piece of **** at his job.

    Again - scratch isnt' the issue. His sleazeball attitude is.
     
    PrimePorkchop, Jan 30, 2013
    PrimePorkchop, Jan 30, 2013
  16. Jan 30, 2013 #14
    nitestalker

    nitestalker New Member

    6,489
    0
    0
    If you took your new pick up in for an oil change and it was scratched would you ignore it? :confused:
     
    nitestalker, Jan 30, 2013
    nitestalker, Jan 30, 2013
  17. Jan 30, 2013 #15
    PrimePorkchop

    PrimePorkchop New Member

    1,743
    0
    0
    Now, yes, it's a small scratch - doesn't affect the function of the rifle in any way shape or form.

    But if you had a truck, and I walked by and gouged it with a key - spit at your feet, and told you to piss off - would you go on your merry way, or stomp a mudhole in my ass?

    I rest my case :D
     
    PrimePorkchop, Jan 30, 2013
    PrimePorkchop, Jan 30, 2013
  18. Jan 30, 2013 #16
    dog2000tj

    dog2000tj New Member

    8,176
    2
    0
    I get it ... and I understand ;) But what's done is done :eek: About the only thing you can change now about it is to have a talk with his Boss. Chacnes are he will make it right ... if not, chalk it up and move on and let everyone you know that the kid is an idiot ;)


    In the big picture of things ... don't we have more pressing issues to worry about than a scratch on a castle nut? :eek:
     
    dog2000tj, Jan 30, 2013
    dog2000tj, Jan 30, 2013
  19. Jan 30, 2013 #17
    Cattledog

    Cattledog New Member

    1,462
    0
    0
    Yeah , I get the attitude issue. I'd be pissed too. There's only one other guy I'd let touch my firearms, but if he messed anything up he'd be buffing sanding or repainting and apologizing. Seen him do it, and he's not even a gunsmith.
     
    Cattledog, Jan 30, 2013
    Cattledog, Jan 30, 2013
  20. Jan 31, 2013 #18
    bige91603

    bige91603 New Member

    842
    0
    0
    Heads would roll!!!!
     
    bige91603, Jan 31, 2013
    bige91603, Jan 31, 2013
  21. Jan 31, 2013 #19
    PrimePorkchop

    PrimePorkchop New Member

    1,743
    0
    0
    No. I'm calling my congressman :). (I kid I kid)

    Just blowing off stream at the lgs guys arrogance
     
    PrimePorkchop, Jan 31, 2013
    PrimePorkchop, Jan 31, 2013
  22. Jan 31, 2013 #20
    longunner

    longunner New Member

    1,176
    0
    0
    My dad dented the door of my pickup BAD On the second day I had it...it is much better to do it yourself than to have someone else do it that's true...

    I would go in with a level head and ask for a free replacement and put it on MYSELF...lol... And if they say piss off demand a new rifle and sell the one with the scratch :p
     
    longunner, Jan 31, 2013
    longunner, Jan 31, 2013
Page 1 of 4