Firearms Talk banner

Stevens Marksman, Looking for a part

3896 Views 7 Replies 6 Participants Last post by  sasderwn
Hello,

Anyone know where to find parts for a Stevens Marksman 22 break action rifle? The rifle currently does not eject shells. I believe the proper term for the part needed is ejector but I could be wrong.

Thanks
1 - 8 of 8 Posts
doug...

..these two companys are the leaders in any vintage parts...
.. Numrich ars co. and Brownels Co.. but numrich arms would be the best bet:D
Thanks for the responses. I tried the sites both of you listed with no luck. This rifle may become a wall piece.
If you can see the pin that holds it in place, pop it out and take a look at the spring. It may be fouled or broken. I am looking for some replacement springs myself. Good luck.

Christopher
If you can see the pin that holds it in place, pop it out and take a look at the spring. It may be fouled or broken. I am looking for some replacement springs myself. Good luck.

Christopher

I will check, Thanks for the tip.
All Done

I just finished my custom 10-22 what do you guys think.
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top