Firearms Talk banner

1 - 6 of 6 Posts

·
Retired
Joined
·
13,590 Posts
Have you taken it apart to see if there is anything "binding".
Check with the owner's manual to see if it was reassembled correctly after cleaning.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Have you taken it apart to see if there is anything "binding".
Check with the owner's manual to see if it was reassembled correctly after cleaning.
Have you taken it apart to see if there is anything "binding".
Check with the owner's manual to see if it was reassembled correctly after cleaning.
I put a new lifter and new spring and the only way I see that the spring goes is behind the Paul I installed it in the front and it doesn't seem to really do anything the old lichter was worn on the back corner quite a bit I looked at the schematic and it doesn't look like anything's missing
 

·
Retired
Joined
·
13,590 Posts
I'm guessing that you reviewed the available videos posted on YouTube, correct?
 

·
Retired
Joined
·
13,590 Posts
Check this out. It may assist.
 
1 - 6 of 6 Posts
Top