Springfield Armory XD/XDM Pistols Test Quiz Questions

Discussion in 'XD Forum' started by Hoppy74, May 29, 2012.

  1. Hoppy74

    Hoppy74 New Member

    23
    0
    0
    Springfield Armory XD/XDM Pistols Test Quiz Questions
    I am semi-retired and I am taking a self-passed and self-taught Armorers course and now I am on the Springfield Armory XD/XDM Pistols. I hope to become a part-time light Gunsmith in the future.

    There are over 60 quiz questions covering this firearm and I have answered most of them. During my study and research I am having some problems related to some of the following quiz questions. Either I am not sure of the correct answer or I have conflicting answers.

    Can you help me determine the correct answers for these few final 5 quiz questions?Please correct my wrong answers!

    Thanks for your help.

    Note #25. The magazine release button must go into the frame before the magazine catch. - True or False

    Note #26. Three slave pins should be used to reassemble the frame. These slave pins must be the exact same size as the original pins. - True or False

    Note #27. The ejector is held in place by how many pins?
    a) Note #1 pin
    b) 2 pins
    c) 3 pins
    d) 4 pins

    Note #28. The sear spring must go under which pin to give it tension?
    a) The sear pin
    b) The ejector pin
    c) The grip safety pin

    Note #29. The slide stop lever spring must be on top of the slide stop lever to give it tension. - True or False
     
    Last edited: Jun 4, 2012
  2. PlaysWithZombies

    PlaysWithZombies New Member

    878
    0
    0
    Not to be an a$$hole but, doesn't getting the answers for these tests from a forum kinda defeat the purpose of having you take them? Maybe you should just study harder.
     

  3. Hoppy74

    Hoppy74 New Member

    23
    0
    0
    These questions only reprsent a small section of the total 60 questions where I have conflicting answers or could not find the correct answer. Thanks for your help!
     
  4. XxChino13xX

    XxChino13xX New Member

    382
    0
    0
    Umm, kind of off beat, but it may help you out honestly. If you have an iphone (they may have it for the droid also, I don't know), there is an application that actually offers a 3D rendering of the XDM that you can purchase for .99. And it strips the pistol all the way down into all 65 pieces (XDM). If you know the pieces by seeing them and where they come from on/in the gun, then the application would help you out big time honestly. Just my .02.

    By the way, the applications name is Gun Disassembly 2
     
    Last edited: Jun 5, 2012
  5. Hoppy74

    Hoppy74 New Member

    23
    0
    0
    I do not have an IPhone. Thanks!