Firearms Talk banner
1 - 1 of 1 Posts

· Premium Member
Joined
·
1,317 Posts
I have ayugo sks, everytime I shoot it I have to beat the bolt back with a hammer to eject the spent round. I am HOPING all it is, is a worn out gas valve. But if in fact thats all it was wouldnt you still be able to pull the bolt back manly just as I can when I load a clip and jack a bunch of rounds throw is without firing? And it get really stuck I beat on it pretty hard to get it to open up. ANy help would be great. thanks alot

You have something WRONG there! A bad gas valve, plugged gas port,
rusted up piston etc. will prevent the action from operating semi-auto,
but you should still be able to EASILY operate it manually.

First place I would look is the chamber. Is it all crudded up with lacquer
from old Wolf ammo? Sounds like the fired rounds are sticking badly.

Question---does it lock up if you dry fire it? Could possibly be an issue
with the hammer. Not quite sure how, but if the chamber is clean and
shiny that's the next thing I would look at. Does it even TRY to cycle?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top