Firearms Talk banner
1 - 2 of 2 Posts

· Registered
Joined
·
52 Posts
Discussion Starter · #1 ·
I have ayugo sks, everytime I shoot it I have to beat the bolt back with a hammer to eject the spent round. I am HOPING all it is, is a worn out gas valve. But if in fact thats all it was wouldnt you still be able to pull the bolt back manly just as I can when I load a clip and jack a bunch of rounds throw is without firing? And it get really stuck I beat on it pretty hard to get it to open up. ANy help would be great. thanks alot
 

· Registered
Joined
·
52 Posts
Discussion Starter · #3 ·
From what I can see the chamber looks good. No doesnt lock up if I dry fire and it will cycle rounds when they arnt being fired. Some ppl suggested it could be a problem with the hi cap mag so I changed it over to a stock one to and I will check if that worked tommarow. But if I had to guess I would say it was a bad chamber. But thanks for the input I will keep you posted after I shoot it tomarrow. Thanks
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top