Sighting

Discussion in 'AR-15 Discussion' started by Husker_RN, Jan 19, 2013.

  1. Husker_RN

    Husker_RN New Member

    20
    0
    0
    Do most of you use the Improved Battlefield or the Revised improved method (or something else) for the iron sites on your rifles? I've been reading about both and want some "been there shot that" opinions before I start tinkering around with an Allen wrench and knobs. Thanks-
     
  2. Mosin

    Mosin Well-Known Member

    7,368
    164
    63
    What's that???
     

  3. savageman97

    savageman97 New Member

    133
    0
    0
    I was wondering the same thing
     
  4. Quentin

    Quentin New Member

    7,551
    1
    0
    I went with the RIBZ since it also gives you the IBZ and BZ as well. That way you have the 25, 50 and 100 meter zeroes if you want. You just reindex the elevation wheel about six clicks instead of the IBZ's four (if you have the removable carry handle). The info threads talk a lot about A1 and A2 so remember to use twice the clicks if you have A3/A4.

    It's a lot of fun but I don't mess with it anymore since I went with an RDS and rarely shoot over 50 meters. I'm back to the good ol' 25 meter BZ.

    One thing to keep in mind, what distances will you normally shoot... The 50 meter IBZ is great if you want +/- 2.5" from 0 to 220 meters.
     
  5. Quentin

    Quentin New Member

    7,551
    1
    0