Firearms Talk banner
1 - 16 of 16 Posts

· Registered
Joined
·
16 Posts
Discussion Starter · #5 ·
LUBrowningBoy said:
is the accu choke the one you can adjust to different settings?

If so, leave it on IC. Go no tighter than Modified for slugs.
Yeah it screws in. So I don't really know how to set it. I don't see any settings it only screws in about 2 2 1/2 inches. Any help?
 

· Registered
Joined
·
1,363 Posts

· Registered
Joined
·
16 Posts
Discussion Starter · #8 ·
LUBrowningBoy said:
Nevermind...I thought you were referring to the "Poly-Choke."

http://img.photobucket.com/albums/v690/Lynx11/fn%20A5/polychoke1.jpg

I assume your shotgun is a Mossberg?

Unscrew the choke so that it is OUT of barrel completely and look around its sides for markings. Post your findings please.


Photograph Light Finger Thumb Font


It has IMP. CYL on it the barrel is 28" ribbed barrel. Not real worried about the slugs but I need to shoot 00bk out of it.
 

Attachments

· Registered
Joined
·
1,195 Posts
Yea you are fine.....the chokes are what what tightens your pattern up.....the most popular sizes starting from the most open and getting tighter are cylinder, imp cylinder, modified, imp modified, full, and extra full...now there are others but these are the most common you are fine to shoot buckshot or slugs all the way up to a full choke ...hope this helped you out some
 

· Registered
Joined
·
16 Posts
Discussion Starter · #13 ·
akers06 said:
Yea you are fine.....the chokes are what what tightens your pattern up.....the most popular sizes starting from the most open and getting tighter are cylinder, imp cylinder, modified, imp modified, full, and extra full...now there are others but these are the most common you are fine to shoot buckshot or slugs all the way up to a full choke ...hope this helped you out some
Yes it helped a lot thanks. Now what is the best round to shoot turkey with?
 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top