Shotgun Problem

Discussion in 'General Shotgun Discussion' started by orthod0x, Oct 23, 2009.

  1. orthod0x

    orthod0x New Member

    2
    0
    0
    And old shotgun was given to me recently but the wooden handle of the pump is not attached to the metal (see the pics below).

    This there an easy way to fix this?

    This shotgun is probably 35 years old.

    Thanks!

    [​IMG]

    It may be hard to see but the wood slides away from the metal in the next picture. It seems there is a threaded ring that is missing intended to bind the two together.

    [​IMG]
     
  2. TxG

    TxG New Member

    22
    0
    0
    It looks like you are missing what on the Remington 870 is called the fore-end tube nut. Check here and see if these folks have the part for your make and model # of shotgun...

    Welcome to Numrich Gun Parts Corp.
     

  3. stalkingbear

    stalkingbear Well-Known Member

    4,095
    30
    48
    Last edited: Oct 23, 2009
  4. orthod0x

    orthod0x New Member

    2
    0
    0
    It looks I might be out of luck.

    J.C. Higgins Model 20-16GA
    SEARS, ROEBUCK AND CO. 583.2050

    It doesn't seem Numrich has that model listed under Sears or J.C. Higgins but I'm wondering if a part from a similar model would work.

    Thanks for the help!
     
  5. TxG

    TxG New Member

    22
    0
    0
    This may be it....

    Pg. 298 of Numrich Arms (e-gunparts.com) catalog # 26:

    High Standard Model 200
    Also J.C. Higgens M-20 Pump Action Shotgun

    Part # 33, item # 53290 Action Slide Tube Nut
    12 & 16 gauge $10.95