sears roebuck 20 gauge

Discussion in 'General Shotgun Discussion' started by Brutis1656, Feb 6, 2010.

  1. Brutis1656

    Brutis1656 New Member

    7
    0
    0
    so i recently got a shotgun its a sears roebuck 20 gauge single shot break barrel model 101.100A and the ejection is broke. when its shot it wont eject the shell and i cant find any parts for it.any links?
     
  2. DarinCraft

    DarinCraft New Member

    1,159
    0
    0
    Just some quick research revealed it is the same as a Steven's model 95 and a savage 96. Finding parts might be a little difficult.
    Sears 101.100 parts
    Savage 96 parts
    Schematic

    I searched some on gunbroker and found some expired auctions for the extractor. IMO, your best bet would be to search gunbroker from time to time for "Savage 96", "Stevens 95" and "Sears 101.100."

    Hope this helps you out
     
    Last edited: Feb 6, 2010

  3. flyingbrickracing

    flyingbrickracing New Member

    334
    0
    0
  4. masterPsmith

    masterPsmith New Member

    1,346
    1
    0
    Can also try Jack First in Rapid City, So. Dakota.........

    Jim.................
     
  5. RevDerb

    RevDerb New Member

    222
    0
    0
    If it's as old as mine is, it may not need a new ejector. I discovered that the bore was only deep enough for 2 1/2" shells (no, I've never seen them either). I got a gun shop to open it up to 3" and the shells no longer stick in the barrel. I used to have to use a cleaning rod from the muzzle end to get the spent casings out. Now it works perfectly. I bought it 53 years ago from an uncle. Just a thought.
     
  6. Brutis1656

    Brutis1656 New Member

    7
    0
    0
    I'll try that out. thanks to everyone for the links