Scope & Carry handle

Discussion in 'Optics & Mounts' started by PatC, Sep 25, 2011.

  1. PatC

    PatC New Member

    50
    0
    0
    Have had some problem with my carry handle mount coming losse . Tried lock tight , that came losse!! So now im tring a star type lock washer!! Any thoughts on this problem?? Thanks Pat C.
     
  2. rigjumpr

    rigjumpr New Member

    1,004
    0
    0
    quick fix= blue loctite if you don't have try fingernail polish
     

  3. PatC

    PatC New Member

    50
    0
    0
    Thank's Rig!!
     
  4. Axxe55

    Axxe55 The Apocalypse Is Coming.....

    7
    1
    0
    another option that i use on mine, is i removed the stock screw, and found one in the same size with an allen head. then took an allen wrench and cut the short end down, used a star type lock washer, then tightened it down. i did this because i switch between a scope and open sights on mine, plus a red dot scope too. if you are going more permanent, like rig said, go with the locktite or fingernail polish. just another idea for you.