Ruger mark 3 bolt stuck.

Discussion in '.22 Rifle/Rimfire Discussion' started by Uchahi, May 13, 2011.

  1. Uchahi

    Uchahi New Member

    328
    0
    0
    Basically first time taking it down and managed to pull the back strap thing out, ended up tapping it out with a punch. That all went fine. Problem:

    On the youtube videos the bolt basically falls out of the receiver, but mine will only pull out about 1/2- 3/4 of an inch. And it just stops, so I don't want to pull to hard. But I think something is wrong....:confused::confused::confused:

    Any help would be greatly appreciated.

    ( I now know I can never be a gun smith)
     
  2. stalkingbear

    stalkingbear Active Member

    4,077
    4
    38
    Have you tried holding it muzzle up & pulling the trigger? It sounds like the hammer is getting in the way.
     

  3. Uchahi

    Uchahi New Member

    328
    0
    0
    Alright guys managed to get it all back together. There are like 3 "tricks" to get the stupid thing apart and back together.