Remington 700 bdl front sight

Discussion in 'General Rifle Discussion' started by kiabe1, Jan 18, 2014.

  1. kiabe1

    kiabe1 New Member

    587
    0
    0
    I just picked up a used bdl with a bent front sight. I'm seeing alot of different height sights online. Whats the standard height and where do i buy one
     
  2. Axxe55

    Axxe55 The Apocalypse Is Coming.....

    7
    1
    0
    try Numrich, Brownell's or MidwayUSA are the first ones that come to mind. might also try Remington as well.

    pictures man, pictures!:p
     

  3. TLuker

    TLuker New Member

    3,937
    0
    0
    I don't know if there is a standard height, but if you can figure out were they are measuring from then you could measure the one you have and get close. And the elevation adjustment in the rear sight will compensate for some difference.
     
  4. hiwall

    hiwall Well-Known Member

    4,269
    22
    48
    1st I would try to straighten the sight you have now. If not remove the bent sight and measure the how high the sight is. They use the measurement from bead on top to the flat bottom. I'm guessing yours at about .375"