Firearms Talk banner
1 - 16 of 16 Posts

·
Registered
Joined
·
1,178 Posts
Discussion Starter · #1 ·
Is there anywhere I can get one? I've been looking into putting together a nice looking 700 and buying a whole rifle just to replace the stock and scope (if it comes with one) seems kind of dumb. I want to get it in .308 and from what I understand that requires a short action. Is having the option of a detachable magazine dictated by which stock you get? Just some questions I'll probably have more as I do more research......
 

·
Registered
Joined
·
665 Posts
longunner said:
Is there anywhere I can get one? I've been looking into putting together a nice looking 700 and buying a whole rifle just to replace the stock and scope (if it comes with one) seems kind of dumb. I want to get it in .308 and from what I understand that requires a short action. Is having the option of a detachable magazine dictated by which stock you get? Just some questions I'll probably have more as I do more research......
How much ya looking to spend? CDI Precision will inlet your stock for their drop mag conversion at a reasonable price.
 

·
Registered
Joined
·
1,178 Posts
Discussion Starter · #3 ·
Well I do want a tactical style stock so I'm sure that it would accept a box magazine. Should have been more specific when I said nice looking lol. I was looking at the Choate ultimate sniper stock, have any experience with them?
 

·
Banned
Joined
·
0 Posts
Is there anywhere I can get one? I've been looking into putting together a nice looking 700 and buying a whole rifle just to replace the stock and scope (if it comes with one) seems kind of dumb. I want to get it in .308 and from what I understand that requires a short action. Is having the option of a detachable magazine dictated by which stock you get? Just some questions I'll probably have more as I do more research......
check out Brownell's. that's where i bought my LA M700 reciever from and had it shipped to my gun dealer. but check out the website as they get limited runs of them in various action lengths and materials. but they are brandnew Remington recievers with the bolt and trigger group.

for stocks, check out Mcmillan and H-S Precision as both have DBM options on their stocks. not cheap, but both are very good stocks. both have the bottom metal to make the rifle into a DBM type rifle.
 

·
Registered
Joined
·
1,178 Posts
Discussion Starter · #5 ·
check out Brownell's. that's where i bought my LA M700 reciever from and had it shipped to my gun dealer. but check out the website as they get limited runs of them in various action lengths and materials. but they are brandnew Remington recievers with the bolt and trigger group.

for stocks, check out Mcmillan and H-S Precision as both have DBM options on their stocks. not cheap, but both are very good stocks. both have the bottom metal to make the rifle into a DBM type rifle.
Could I attach the barrel myself to the receiver? Guess that could be good because I could choose the barrel length...
 

·
Banned
Joined
·
0 Posts
Could I attach the barrel myself to the receiver? Guess that could be good because I could choose the barrel length...
yes and no! yes you could, if you get a barrel that's short chambered. you would then need a finishing reamer in the caliber you want to go with and a set of headspace gauges and the measuring equipment required to measure the chamber depth.

no, if you don't have this equipment or the skill set required to do it properly and safely. setting the headspace properly is a very critical step in makeing the rifle safe to use.

besides the cost of the barrel, you are looking at between $300-400 for the tools and equipment required to chamber the barrel.
 

·
Registered
Joined
·
1,178 Posts
Discussion Starter · #7 ·
yes and no! yes you could, if you get a barrel that's short chambered. you would then need a finishing reamer in the caliber you want to go with and a set of headspace gauges and the measuring equipment required to measure the chamber depth.

no, if you don't have this equipment or the skill set required to do it properly and safely. setting the headspace properly is a very critical step in makeing the rifle safe to use.

besides the cost of the barrel, you are looking at between $300-400 for the tools and equipment required to chamber the barrel.
Sounds like I need a barreled receiver :eek::D
 

·
Banned
Joined
·
0 Posts
Sounds like I need a barreled receiver :eek::D
quite possibly, yes. look around the gun stores and pawn shops for a used M700 in the caliber you want. then just order a stock and bottom metal in whatever suits you.

i paid $500 for a bare Remington reciever. now i do at some point plan on buying my own barrel and doing it myself. but i know what the cost will be or close to it to do my own, and it won't be the only barrel in that caliber for that reciever. so every time i replace the barrel, i will already have the tools needed to do it.
 

·
Registered
Joined
·
1,178 Posts
Discussion Starter · #9 ·
Yea I was thinking about doing that too, buying the receiver and barrel wouldn't end up being much less expensive than buying a whole new rifle, much less a used one.
 

·
Banned
Joined
·
0 Posts
Yea I was thinking about doing that too, buying the receiver and barrel wouldn't end up being much less expensive than buying a whole new rifle, much less a used one.
if you were only wanting to do one rifle, then it would be much cheaper in the long run to either buy a bare reciever and send it to a barrel maker and have them make and chamber a barrel in the caliber of your choice and attach it for you. or buy a new or used rifle in the caliber you want and just restock it in the stock of your choice.

a brand new Remington SPS shouldn't cost more than about $650 NIB. then just buy the stock of your choice and do all the work yourself.
 

·
Registered
Joined
·
1,462 Posts
axxe55 said:
if you were only wanting to do one rifle, then it would be much cheaper in the long run to either buy a bare reciever and send it to a barrel maker and have them make and chamber a barrel in the caliber of your choice and attach it for you. or buy a new or used rifle in the caliber you want and just restock it in the stock of your choice.

a brand new Remington SPS shouldn't cost more than about $650 NIB. then just buy the stock of your choice and do all the work yourself.
That is what I did. I bought a Remington 700 SPS-V heavy barrel in .308. I then ditched the plastic stock, put on new stock, scope and then switched out the floor plate to one with a detachable 10 round magazine.



Table Air gun Trigger Wood Machine gun
 

Attachments

·
Banned
Joined
·
0 Posts
That is what I did. I bought a Remington 700 SPS-V heavy barrel in .308. I then ditched the plastic stock, put on new stock, scope and then switched out the floor plate to one with a detachable 10 round magazine.



View attachment 91025
which brand of stock is that? i like it a lot. very good looking rifle TG! very nice looking indeed. :D

That's a nice lookin rifle...pretty much exactly what I want to do but with a different stock
this is pretty much what i was thinking of for you LG. this would be a much better cost efficient way of getting what you are trying to get without the hassle of rebarreling a reciever.
 

·
Registered
Joined
·
1,178 Posts
Discussion Starter · #14 ·
which brand of stock is that? i like it a lot. very good looking rifle TG! very nice looking indeed. :D



this is pretty much what i was thinking of for you LG. this would be a much better cost efficient way of getting what you are trying to get without the hassle of rebarreling a reciever.
Yea that's probably what I'll do...I will still keep a lookout for a used one though...
 

·
Registered
Joined
·
1,462 Posts
axxe55 said:
which brand of stock is that? i like it a lot. very good looking rifle TG! very nice looking indeed. :D

this is pretty much what i was thinking of for you LG. this would be a much better cost efficient way of getting what you are trying to get without the hassle of rebarreling a reciever.
Bobby Hart AccuBlock Long Range Target / Tactical™ (LRT) Remington 700 BDL Laminated Heavy Barrel Riflestocks WITH ALUMINUM BEDDING BLOCK

I bought it as well as the detachable magazine setup from Stockysstocks.com. I love it.



Product Hand tool Tool Font Bicycle part
 

Attachments

1 - 16 of 16 Posts
Top