Yesterday, I desided I finaly had everything gathered up to reload my first batch. I wanted to load a few an test them out. I was reloading 45 auto with 185 grain jswc. I used a 4 die set and gave it a "light" crimp. When I checked the round out, I didn't like the looks of the crip so I added a bit more. A bit more being 3/4 turn past vice 1/2 turn for a light crimp. When I tested the rounds out, I noticed it felt different chambering a round. So the next thing I did was to clear the pistol. Was hard. Would this show not enough crimp? I fired the rounds and recovered the brass. They looked good, except maybe a little sooted up on one side. What do you think?