red color fill

Discussion in 'Glock Forum' started by usmarine3533, Sep 17, 2012.

  1. usmarine3533

    usmarine3533 New Member

    32
    0
    0
    anybody know a good way to color fill the etching on a block. i wanna fill my g32 in with red. gonna try and do it tonight
     
  2. miamivice

    miamivice New Member

    47
    0
    0

    Nail polish and Non-acetone polish remover.
     

  3. Fathead00

    Fathead00 New Member

    2,922
    0
    0
    Like the above post, use nail polish for your color. If you use nail polish remover with acetone in it, make sure you remove the slide. If the acetone gets on the polymer it will discolor it. Here's a pic of my G35.

    image-385867307.jpg



    image-1785179166.jpg
     
  4. usmarine3533

    usmarine3533 New Member

    32
    0
    0
    well the red showed up really shirt so i went with white.

    ForumRunner_20120917_202428.jpg



    ForumRunner_20120917_202452.jpg
     
  5. Fathead00

    Fathead00 New Member

    2,922
    0
    0
    Try putting the red over a filler color. When I just put the green it didn't look as good. I removed the green, put a silver down, and then green on top.
     
  6. USEBOTHHANDS

    USEBOTHHANDS New Member

    1,319
    2
    0
    use a brighter red. fingernail polish comes in thousands of colors.
     
  7. mudslinger79

    mudslinger79 New Member

    258
    0
    0
    I did my Walther P99 in white a while back and it turned out great. Next up is my Glock 22.