pu sniper scope

Discussion in 'Curio & Relic Discussion' started by gunho1951, May 7, 2011.

  1. gunho1951

    gunho1951 New Member

    1
    0
    0
    does anyone know how to adjust the pu sniper scope an a 91/30 nagant
     
  2. Trez

    Trez Well-Known Member

    4,467
    69
    48
    Heres everything you need to know.... you will have to do some minor fitting to your rifle to have the recticle in the correct spot...

    Sighting In A PU Sniper
     

  3. TXnorton

    TXnorton New Member

    1,376
    0
    0
    I helped a buddy get his 91/30 PU scope dialed in. He had to do a good bit of fitting work on the scope mount to get it close. We were able to shoot at a very high dirt berm with discernable aiming points for me (as an observer) to guide him to be able hit close to his point of aim. It took a couple of shooting/fitting sessions to get him where he could be on paper at 100 yards and then use the reticule adjustments to dial it in.
     
  4. m72law

    m72law New Member

    1,316
    0
    0
    a laser bore sighter really helps alot when fitting these scopes
     
  5. yellowhand

    yellowhand New Member

    89
    0
    0
    good explanation

    Thanks for the site posting.
     
  6. jpattersonnh

    jpattersonnh Active Member

    5,360
    3
    38
    You could also use the iron sights as they are visible. All of my side mount scopes were sighted this way.
     
  7. Trez

    Trez Well-Known Member

    4,467
    69
    48
    Its the site I used......

    I would agree!!