primer flip

Discussion in 'Ammunition & Reloading' started by joshfireart, May 22, 2010.

  1. joshfireart

    joshfireart New Member

    267
    0
    0
    im a little slow some times i have a dillon 550 had been set up to load 223 change every thing over to load 45 acp a bout every 6 rnd it flip the primer side ways i would watch icould not see the problem so reather then stop i fought my way though it finely i couldnt take it any moor so stoped and ran it real slow with no case beeing ran and i could feel that the pirimer cup was running a little past center re ajusted it now once again flawless piont is if its not right stop
     
  2. anm2_man

    anm2_man Member

    504
    2
    18
    Been there and done that - But as with any progressive press, a SMOOTH operation is ideal. No herky/Jerky stuff.

    :)
     

  3. TXnorton

    TXnorton New Member

    1,376
    0
    0
    Make sure the bolt stop adjustment is set correctly for your large primer arm also make sure the whole assembly is CLEAN!
     
  4. joshfireart

    joshfireart New Member

    267
    0
    0
    it is clean and tight just the way we like it:rolleyes: