Pps 43c recoil spring question

Discussion in 'Auto & Semi-Auto Discussion' started by george1108, Nov 5, 2011.

  1. george1108

    george1108 New Member

    5
    0
    0
    I just purchased a PPS 43C today and took it to the range after cleaning.
    Does anyone know the strength of the standard recoil spring or where I can get a slightly stronger spring?
    The typical east block 7.62x25 seems to be a hot load. Looking at my brass, some of the necks are almost straightened and the brass is very dirty from blow by.
    Will a heavier spring alleviate this or is there something that I am missing.:confused:

    shooting at 25 feet(standing) it was very accurate with no malfunctions.
    At 50 yards shooting from a rest I had a few misfeeds. it shot very high and I had to bring the group down about 12". It was right on at 25ft.
    I like the gun and think it will be one of my fun to shoot guns.

    Thank you for your answers or comments.