Post up your 700!

Discussion in 'General Rifle Discussion' started by LotzORemmies, Dec 17, 2009.

  1. LotzORemmies

    LotzORemmies New Member

    187
    0
    0
    Lets see that custom remmie!
     
  2. LotzORemmies

    LotzORemmies New Member

    187
    0
    0
    (if it didn't sink to the bottom of a lake with twenty of its best friends along with ammo):D
     

  3. DaveP

    DaveP New Member

    4
    0
    0
    i bought my dad a new remmy for christmas, once we open it ill get some good pictures.
     
  4. jbshoots

    jbshoots New Member

    160
    0
    0
    not really all that "custom", but here's my remington model 700 in .30-06:

    [​IMG]
     
  5. Bolosniper

    Bolosniper New Member

    60
    0
    0
    Here is one in 300 Win Mag that as shown in the picture weighs 11.9 lbs.

    The bolt and receiver bodies were first cryoed, then blue printed, and the bolt is sleeved and the firing pin hole bushed. An oversized aftermarket lug, and custom firing pin assembly were also used as was a Jewell trigger. A Farrell aluminum Picatinny rail and V-Tac aluminum rings hold the NightForce 12-42x56 scope.

    The barrel is a Broughton 5C ® rifled 1/11" twist with a carbon fiber composite wrapping from Advanced Barrel Systems, and a Badger Ordnance FTE muzzle brake.

    The stock is an AICS.

    [​IMG]
     
  6. Wambli

    Wambli Member

    958
    0
    16
    Remington Custom Shop 700 AWR in .300 Win Mag With Leupold VX-III 4.5-14
    [​IMG]

    My latest project coyote rig. .223 700 with a factory varmint barrel bedded into an HS stock with a Nikon Monarch Titanium scope and a Versa-Pod.
    [​IMG]
     
  7. JonM

    JonM Moderator

    20,110
    19
    38
    This is mine. Remington 700 XCR .308 with Leupold Mk4 4.5-14x50mm LR/T M1.

    [​IMG]
     
  8. LotzORemmies

    LotzORemmies New Member

    187
    0
    0
    Hold on.... got this stuff on my pants... wont come... off. SO.... VP uh. So do FTF members get the hook up???
     
  9. LotzORemmies

    LotzORemmies New Member

    187
    0
    0
    Was thinking about that leu for my 700. Your boomsticks definitely have some milkshake. Very nice.
     
  10. hillbilly68

    hillbilly68 New Member

    994
    0
    0
    Started as an SPS
    Some GAP work, some mine
     

    Attached Files:

  11. opaww

    opaww New Member

    4,868
    0
    0
    I feel so left out sense I don't have a remington
     
  12. jpattersonnh

    jpattersonnh Active Member

    5,360
    5
    38
    Me Either, But I'm good with that. Mine are better!!:D
     
  13. cpttango30

    cpttango30 New Member

    13,934
    4
    0
    Look around mine is posted all over the place.
     
  14. LotzORemmies

    LotzORemmies New Member

    187
    0
    0
    Gotta ask, how much total investment?
     
  15. LotzORemmies

    LotzORemmies New Member

    187
    0
    0
    well post it up big boy!
     
  16. Wambli

    Wambli Member

    958
    0
    16
    Thanks! I'm having another one built as we speak and should be done in January. It's a long range shooter in .308 fully customized to my specs. I like 700s.
     
  17. LotzORemmies

    LotzORemmies New Member

    187
    0
    0
    DO TELL! haha

    So how much does that pretty bolt help your shot, or is it just for looks? Cuz it looks damn good.
     
  18. Wambli

    Wambli Member

    958
    0
    16
    Thanks! The AWR is solid a .5MOA gun with factory premium 180gr ammo. Not bad for a .300 Win Mag that weights in at 7 lbs. The .223 is untested, I just put it together. If it doesn't shoot .5 MOA or better after barrel break-in it is going to the same gentleman that is building the new one for fine tuning.

    I'll post a pic of the new one when I go pick it up. The base gun is a Remington Custom shop 40X that shot like this BEFORE the rebuild.

    [​IMG]

    I have very high expectations of the end result.
     
  19. truevil1313

    truevil1313 New Member

    474
    0
    0
    This started life as an SPS. It is chambered in 7mm Rem Mag.
    Lothar Walther barrel, custom Briely mussel break, Timiney comp trigger set at 3 lbs. Bell and Carlson stock, Badger O +15 MOA picatiney scope rail, Harris bi-pod, action and bolt trued and bluprinted by Briely, and all metal was teflon finished. I am pretty much done with the break in, but I have not had the chance to do any serious trials with it yet.
     

    Attached Files:

  20. LotzORemmies

    LotzORemmies New Member

    187
    0
    0
    The Project. Still has a ways to go.
     

    Attached Files: