Firearms Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,105 Posts
I have a Cav lower and have no complaints about it at all. It's light and well made.

The pivot and take down pins are specific to the lower as they are slightly longer than standard pins and have detent bearings.

The buffer and spring are retained by a pin which you will have to supply tourself also. I used an appriopriate diameter drill bit ground to the proper length. The rest of the internals are standard.

I am using mine for a light weight build with an A1 countour 16" barrel and carbon fiber carbine forend. Should weigh in around, maybe slightly under, 5 pounds if the barrel ever gets here.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top