please help, gas chamber is stuck

Discussion in 'AK & SKS Discussion' started by akageorgia, Aug 2, 2009.

  1. akageorgia

    akageorgia New Member

    2
    0
    0
    i cant get my gas chamber off my sks, it is a yugo with a tapco t6 stock
     
  2. crockett007

    crockett007 New Member

    209
    0
    0
    Not trying to be obvious here, but I saw a buddy the other day work for 20 minutes before he realized the bolt carrier and gas piston assy were still in the gun ?
     

  3. cqcrich

    cqcrich New Member

    7
    0
    0
    Have you ever taken it apart before? I'm only asking because if you've never done it before it could be hard to figure out.
    Behind the rear sight there is a lever that you will need to pull 3/4 the way up. Then use a small screwdriver to pry against the barrel and the tube. The tube should pop out.
     
  4. .22hustler

    .22hustler New Member

    213
    0
    0
    Be careful you don't pull that lever up too much. Then you're in deep doo-doo.
     
  5. orangello

    orangello New Member

    19,156
    0
    0
    I bleve that is what i did to my norinco the first time i cleaned it. It shot the little operating rod out of there with a good deal of force. It wasn't that easy to get it back in there, either.
     
  6. res45

    res45 New Member

    195
    0
    0