Oracle kit and PSA lower 1st build

Discussion in 'AR-15 Discussion' started by Tenderribbs, Jul 11, 2012.

  1. Tenderribbs

    Tenderribbs New Member

    317
    0
    0
    I just ordered a oracle DPMS kit from stacks . I had to look a while to find this
    Particular kit . I would say 90 percent of businesses were backordered, same thing with the del-ton kits. I got a PSA lower from jssports. Same issue with lower also. I have bought four other Ars in the past year, but this is my first build . I orders a reciever block, a punch kit and universal tool for barrel and a a vice . If you guys have any recomendations it would be appreciated.
     
  2. jg3

    jg3 New Member

    95
    0
    0
    First thing I would do is read the stickies at the top of the page.

    I also really recommend the tool brownells sells for installing the pivot pin detent. I know some people have found home remedies for this. But after losing 2 detente in the depths of our carpet I won't go without it again.

    Other than that be sure to have some loctite handy and a torque wrench too.
     

  3. Tenderribbs

    Tenderribbs New Member

    317
    0
    0
    What size torq wrench ?
     
    Last edited: Jul 12, 2012
  4. Tenderribbs

    Tenderribbs New Member

    317
    0
    0
    What type of fittings will I need for the torq wrench? Allen head , socket, or flat head? Thanks for the help . I would like
    To have everything I need ahead of time
     
  5. Quentin

    Quentin New Member

    7,551
    1
    0
    You know it's impossible to have everything you need. There's always one last thing you don't have! :D
     
  6. jg3

    jg3 New Member

    95
    0
    0
    Not sure the maximum ft/lb you will need, I think 80 would be plenty...as for the fittings needed the universal armorers wrench will have a place for the head of the socket. But again a few you tube videos and the stickies here should give you plenty of guidance
     
  7. Quentin

    Quentin New Member

    7,551
    1
    0
    Torque or Torx?