Firearms Talk banner
1 - 10 of 10 Posts

·
Registered
Joined
·
7,864 Posts
It is often called a shepherds hook. It is a piece if spring wire that fits in the grooves in the pins that hold the hammer and trigger in place. The wire keeps the pins from walking out if the receiver. You can find a few websites that show how it should be routed if you google AK Shepherds hook.
 

·
Banned
Joined
·
18,636 Posts
May need to find out WHY it fell out to.
 

·
Registered
Joined
·
164 Posts
Discussion Starter · #7 ·
Thank you very much for.the help guys i managed to put it back in and it was pain in the arse but got ty again
 

·
Registered
Joined
·
2,315 Posts
Thank you very much for.the help guys i managed to put it back in and it was pain in the arse but got ty again
The fact that it was a pain probably means you got it in right...and it may have been installed improperly for it to just "fall out":eek:.
 

·
Registered
Joined
·
7,864 Posts
Thank you very much for.the help guys i managed to put it back in and it was pain in the arse but got ty again
Yeah, that replacement plate is much nicer to use. A worthwhile upgrade to be sure.
 
1 - 10 of 10 Posts
Top