New to reloading.

Discussion in 'Ammunition & Reloading' started by texaswoodworker, Jan 17, 2012.

  1. texaswoodworker

    texaswoodworker New Member

    10,198
    0
    0
    I just recieved a 40 year old RCBS press as a gift, and now I need to get some dies. I have learned some of the basics of reloading, but I have a few questions about the equipment.

    1. Will dies from other companies (like Lee) work in this press?

    2. Will new RCBS dies work in this older press?

    3. What is the difference between 2 die, and 3 dies sets for rifles? (I mainly want to reload 30-06)

    4. Where is the best place to buy the dies, and other things I need for this press?

    5. Is there anything else I need to know?

    I am excited about getting into reloading. I have done it once, and loved it. :D

    Oh, and one last question. I plan on getting an SKS within the next month, and was wondering if it reloading 7.62x39mm would make it cheaper? Is it even worth the time and money to get the dies since it is already so cheap? (I plan on using the super cheap stuff anyways, this was just a question I had.)

    Thanks
     
    Last edited: Jan 17, 2012
  2. MidnightExpress

    MidnightExpress New Member

    251
    0
    0
    1) Yes, Lee dies will fit

    2) Yes, most dies are the same thread until you get into the large calibers like the 50BMG.

    3) Check with Lee, their site will give you the information on the dies and die sets. Lee Precision: Rifle Reloading Dies Overview

    4) Midway USA, Cabela's, Brownells, Cheaper Than Dirt and a number of others I can't think of at the moment.

    5) You'll need to know a lot, my first three manuals covered everything. Lee 2nd Edition, Hornady 7th and Speer #13 are the three manuals I started with. There was plenty of information in them to keep me from loosing any body parts when I started. A lot of people swear by the ABC'c of Reloading, but I was a little disappointed in the Lyman 49th that was hyped so I doubt I'll buy the ABC's. It will probably just rehash what I've read in all the other manuals. What ever manual(s) you decide to buy, the most important thing is to read them before you start.

    6) No clue on the 7.62x39, never bothered to load or buy for that cartridge.
     

  3. Txhillbilly

    Txhillbilly Active Member

    4,435
    28
    38
    Aaron,As long as the threads are 7/8x14 any brand of dies made today will work.
    I mainly use Lee dies for my reloading,they are well made and simple to set up and use.But,I also use RCBS,and Redding dies.They all perform well.
    If you buy Lee's,get the Deluxe rifle die set.It will come with a Full length sizing die,Neck sizing die,and the Bullet seating die,as well as a shell holder.
    Cabelas sells them for $33,you can probably find them cheaper if you look.

    You will also need a good beam scale,Ebay is a good place to pick up a used one.I have bought several off there for friends for under $50.

    You also need to get a few reloading manuals,I like to have reloading data from both the Bullet and Powder mfg's,and seeing that you are new to this,The ABC's of reloading is also a great book for learning the do's & do not's.

    A nice digital/dial caliper is also a must to have.They don't have to be the high $$$ ones,but a good caliper will run $30-50

    Primers & Powder are best if bought local.If not you will have to pay a Haz-Mat fee along with shipping.I mainly use Winchester or CCI primers,and two mainstay 30/06 powders are Hogdon H4350 & H4831.There are many other powders that will work,but these have been used for many,many years with the 30/06.

    There are a lot of other little things that will make reloading easier,but you don't need them right from the start-Primer Pocket cleaning tool,Case chamfer tool,Case trimming tool,etc.
     
  4. texaswoodworker

    texaswoodworker New Member

    10,198
    0
    0
    Sweet, thanks for the info. The manual was another thing I was needing.

    Yeah, I didn't think that many people would reload something that cheap. I was just curious about it. I will probably still keep the spent brass though. :D

    Looks like I'm getting a lee set then. I already have the beam scale, so I guess I need the caliper next.
    I don't know if I can get the powder and primers local. I'll have to look around. The local gun shop/pawn shop may have some hopefully.
    Thanks for the info on the other tools too. I'll be sure to get them later (or sooner depending on the price.)
     
  5. Esoterix

    Esoterix New Member

    6
    0
    0
    Hey Texas Woodworker,

    I hope I am NOT to late, because I think you have a major problem!! :eek: You say this RCBS Press is 40 years old so that means it is either the "Original" RockChucker (ie RS) or the RCBS RockChucker II (ie RS II on the press opening). IF either is the case, your press does NOT have a long enough stroke to handle ANY rifle cartridges bigger than the .223/5.56mm round. I have had my RCBS RockChucker II Press for the past 25-30 years.

    Before you order ANY dies, I would suggest you verify exactly what model press you have by calling RCBS or e-mailing them. Let us know how things turn out. The press can always be used for specialty uses in the future, and buy a new press to meet your needs for both rifle and pistol shooting. :cool:


    RCBS Operations
    605 Oro Dam Blvd
    Oroville, CA 95965
    1-800-533-5000
    email us at rcbs.tech[at]atk.com


    Sincerely,

    Doug
     
    Last edited: Jan 18, 2012
  6. texaswoodworker

    texaswoodworker New Member

    10,198
    0
    0
    Well, 40 years was the estimate I was told. I'll post a pic later. I think it is big enough for large rifle rounds.
     
  7. texaswoodworker

    texaswoodworker New Member

    10,198
    0
    0
    Here's the pics. (Sorry abou the crappy pics. I don't know why they came out so bad.)

    Quick question. Are new presses made of heavy cast iron too? (I like cast iron :D)
     

    Attached Files:

    Last edited: Jan 18, 2012
  8. jjfuller1

    jjfuller1 New Member

    4,738
    2
    0
    it looks like my uncles press older press. and ive reloaded .308 and 30/06. my uncle has reloaded 7mm mag with no problems..

    did the press come with a powder measure??
     
  9. texaswoodworker

    texaswoodworker New Member

    10,198
    0
    0
    I got a scale with it... What does a powder measure look like? (I know very little about reloading as of now)
     
  10. c3shooter

    c3shooter Administrator Staff Member

    21,343
    217
    63
    Before buying anything else, go over to Amazon, get a used copy (2011 version is fine) of The ABCs of Reloading. Read it before you buy.

    Lee Precision website has some good info. You can also pick up some items (dies) fairly cheaply on Ebay (yeah, I hate it too, BUT...)

    powdermeasure.jpg
    Powder measure
     
    Last edited: Jan 18, 2012
  11. jjfuller1

    jjfuller1 New Member

    4,738
    2
    0
  12. Trez

    Trez Well-Known Member

    4,467
    69
    48
    Im not sure if reloading for the SKS is worth it.... I just bought some Yugo M67 surplus in bulk and it came out to about $5.00 per 20 with the rds. already loaded on clips and S&H... I suppose it could be worth it, if you were making hunting or SD rounds?

    With that said I have a thread going about reloading the SKS, but thats just a effort to use up some "odd" components I normally wouldnt use... (150 gr. bullets, Berdan primers and cases...)
     
  13. texaswoodworker

    texaswoodworker New Member

    10,198
    0
    0
    Thanks everyone for the help. I'll be getting a few books off amazon soon, and hopefully will be reloading in no time. :D