New to M&P

Discussion in 'M&P Forum' started by psymmonds, Aug 17, 2012.

  1. psymmonds

    psymmonds New Member

    165
    0
    0
    I'm planning on getting a M&P 40 compact soon. Is there anything I should know (pros and cons)? I've heard some negative things on the trigger pull.
     
  2. dmnau

    dmnau New Member

    1
    0
    0
    Get an Apex trigger job it is worth the money, I carry my 40c and shoot every chance I get, over 2000 rounds and no problems
     

  3. mountainman13

    mountainman13 New Member

    11,488
    0
    0
    Agreed. You'll want to have a trigger job done on it.
     
  4. KeysKelly

    KeysKelly New Member

    278
    0
    0
    I like M&P's a lot but they do have funny triggers. Not bad triggers, just different.

    One food for thought is something my Dad, a 38 year LA Cop, told my daughter's boyfriend when he was thinking about buying a Glock. The same thought can be applied to the M&P or really any gun. Her boyfriend asked Dad what he thought about a Glock with a new trigger job and replacing the barrel for one that will allow him to shoot reloads. Dad's answer was:

    "Why don't you price the Glock as it comes from the factory, price the trigger job, price the new barrel and add those three figures together. That is exactly how much you are spending on your Glock and will open up a whole new window of available guns in that price range. Now you are in the market for a Sig, HK, Colt, FN or even a low end Kimber. Wouldn't you rather have a Sig over a Glock?"

    Same idea goes with the M&P. You can buy the M&P in the upper $400's to upper $500's but if you add in a trigger job add that in when figuring exactly how much the gun cost you. Then look at options in that price range. I am not putting M&P down. I like them a lot as they come in the box and Smith & Wesson is certanly a well proven brand. I am just looking at from a money point.
     
  5. Wiseman3

    Wiseman3 New Member

    1,206
    0
    0
    well the trigger job if you do your trigger yourself will cost you 90 bucks after that it's a top end firearm id stack up against the hks and sigs all day long. Now op run a few thousand rounds through it before you decide on apex. you understand you gun better and when you do do the apex kit you'll really see the difference.
     
  6. cswann1

    cswann1 New Member

    179
    0
    0
    I was able to do a fairly good trigger job on my M&P 9 with some 3M 800 grit and a couple of drops of gun oil. Once the area on the paper you're working with gets loaded with metal, it probably gets up into the 1200-1500 grit range and stops removing metal and starts polishing.
    I did the over travel and sear mod as described here a day or two after I got my 9, and it's been a flawless performer since.

    The only money I've spent was on a DPM spring because I sometimes shoot Federal 115g +P+ loads.
     
  7. Wiseman3

    Wiseman3 New Member

    1,206
    0
    0
    What did you get your trigger down to? My .45 was a bear averaging 7lbs before. I kind of wish I had seen that procedure before I might have gave it a whirl.
     
  8. cswann1

    cswann1 New Member

    179
    0
    0
    Mine is sitting at just under 6lbs.
     
  9. beaglesam

    beaglesam Active Member

    1,936
    0
    36
  10. WarFrog

    WarFrog New Member

    19
    0
    0
    Trigger pull is something you'll get use to. It's a super reliable pistol and ideal for concealed carry. It's a hair slimmer than my G27 and not as blocky. I carry it in a CompTac appendix carry and it conceals very well with just a tshirt. I've upgraded the sights to the TruGlo TFO and it has been one of the best things I've done to the gun. Good luck with yours. Below is mine.
    [​IMG]
    [​IMG]
     
  11. Down_Town_Dalton

    Down_Town_Dalton New Member

    103
    0
    0
    How did you get your barrel to look like that?
     
  12. WarFrog

    WarFrog New Member

    19
    0
    0
    Hi, I own a coating company. It's coated in TiN in a PVD chamber. Awesome and tough. I've had 800+ rounds through it and it still looks brand new. Also the carbon just wipes right off. I've increased the performance by adding a coating of FrogLube and it's very slick.
    Anyways, if your interested in more information, my company website is
    www.warfrogtacticalsolutions.com
     
  13. Down_Town_Dalton

    Down_Town_Dalton New Member

    103
    0
    0
    I sent you a private message.
     
  14. wittmeba

    wittmeba New Member

    1,097
    1
    0