Firearms Talk banner

New Reloading Bench

2868 Views 6 Replies 4 Participants Last post by  anm2_man
Finally got this puppy finished. Everything now has a place. Upper drawers for parts, lower drawer for powder and a place to hold all of the tool heads (note that the tool head stands are on drawer sliders ie they slide out),


See less See more
1 - 3 of 7 Posts

That is really a slick set up you got there my friend. Very well thought out. I like the added benefit of being able to sit on the stool and just reach down to the slide out tool heads as needed. Well played sir, well played....


JD - That was the problem before. The bench that it was mounted on was 4 inches higher (I know it doesn't sound like much) but my back used to hurt after a couple hundred rounds. This should help a bunch.

I have to load 250 30-06 Tracer M25 rounds for my son's 1919 (Since my standard 06 reloads are a little to long for his converted IZZY gun) and then I need to do another 200 testing out some WC846T powder. I need to find a load that works for both his 1919 and my ANM2. It will be a busy summer.
Good looking set up. The only thing I would add is the bullet tray. I have that on my dillon and boy is it a life saver.
Soon there is going to be a KISS bullet feeding accessory hooked to the 650. Don't need no bullet tray with one of those babies.
1 - 3 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.