California New EPLOWERS Polymer 80% Lowers

Discussion in 'Firearms Parts and Accesories' started by freemanrebel, Jul 8, 2013.

  1. freemanrebel

    freemanrebel New Member

    10
    0
    0
    [​IMG]
    Hi my name is John; I represent a company called EP Lowers

    EP Lowers offers an 80% completed AR-15 lower receiver unlike any other in the firearms industry. We offer the first ever 80% polymer lower available and the only 80% lower that requires no jig to complete. We are calling it the EP-80.

    Why have polymer lowers failed in the past? Perhaps: 1. Polymer lowers where manufactured identical in dimension to aluminum alloy lowers. 2. Polymer lowers where manufactured from material that was not as strong as aluminum alloys. 3. There was no consideration in design for a change in the material.

    Our lowers are constructed of an ultra strong fiber reinforced polymer. The exact composition is proprietary but I will say its much stronger than any 100% polymer lower available and although we believe our material would be strong enough as is, Our design reinforces the area of the front pivot pin holes and the buffer tube area with additional material where lesser polymer lowers from other manufacturers have failed.

    Our product is very strong and durable; much more so than any other polymer lower. You see polymer lowers are injection molded; in the case of our product they are injection molded and then have to survive being milled by our customers. So our 80% lowers are really required to be much stronger for this reason. Also we wanted to have the best product out there and I think we have got that.

    There are distinct advantages to going with an 80%. Yes its going to take some work but not without instilling a sense of accomplishment when completed; and our lowers are the easiest and cheapest to complete because our lowers require no jig and no special tools. In that respect we have a distinct advantage within the 80% market.

    Why no jig? The fire control pocket is dissimilar in color so it’s clearly outlined what needs to be removed. In the case of the black lowers just mill out the white and leave the black area and you’re done. Fire control and pivot pin areas are clearly marked for drilling. As with standard metal lowers it will take a competent person to complete them; however they are lighter and stronger than alloy. Our product is made in the USA; and we offer a lifetime limited warranty.

    We offer multiple colors; these colors are solid so unlike anodized or painted lowers there is no surface coating to scratch; the colors is the same throughout so if it gets scratched just buff it out good as new.


    Please be sure to use coupon code 'calguns' to receive a discount on our website when ordering.

    Check at our hompage www.eplowers.com or check our facebook page at www.facebook.com/eplowers for continuous updates.



    I would be happy to answer any questions you might have.

    Thank You

    [​IMG]

    Note: This bottom photo is in process so not all holes are drilled. As you can see from the top photograph our finished product has the front pivot pin and detent holes already drilled along with the buffer stop and rear take down pin hole etc.

    [​IMG]

    See a customer review:
    [ame="http://www.youtube.com/watch?v=pxcSlOVeXlQ"]http://www.youtube.com/watch?v=pxcSlOVeXlQ[/ame]
    [ame="http://www.youtube.com/watch?v=qFw2-vdZdqg"]http://www.youtube.com/watch?v=qFw2-vdZdqg[/ame]
     
  2. ProfEvo

    ProfEvo New Member

    1
    0
    0
    I put down the deposit on one of these months ago when you first mentioned them. I haven't heard squat since. What's up with that?
     

  3. freemanrebel

    freemanrebel New Member

    10
    0
    0
    PM sent. Let us know your info and we can get to the bottom of it.
     
  4. kbd512

    kbd512 Well-Known Member Lifetime Supporter

    2,723
    64
    48
    Bubba with a dremel... What could possibly go wrong?

    Let me know when a complete stripped lower becomes available.
     
  5. freemanrebel

    freemanrebel New Member

    10
    0
    0
    Clearly nothing went wrong :D

    [ame="http://www.youtube.com/watch?v=rxGWTDSMSUo&feature=c4-overview&list=UUmTryu_57FrI5GxmC0uaY-g"]http://www.youtube.com/watch?v=rxGWTDSMSUo&feature=c4-overview&list=UUmTryu_57FrI5GxmC0uaY-g[/ame]
     
  6. kbd512

    kbd512 Well-Known Member Lifetime Supporter

    2,723
    64
    48
    I was thinking more along the lines of other bubbas.

    Oh well, I've always wanted to "roll my own" and I have my dremel tool handy.

    Are anti-roll pins necessary (or a really good idea) for the hammer and trigger pins, or was that just done for that particular build?
     
  7. freemanrebel

    freemanrebel New Member

    10
    0
    0
    No they aren't necessary.:)
     
  8. Jesse80

    Jesse80 New Member

    72
    1
    0
    How much are these 80% lowers?
     
  9. freemanrebel

    freemanrebel New Member

    10
    0
    0
    We are currently offering them for a price of $100
     
  10. freemanrebel

    freemanrebel New Member

    10
    0
    0
    We are currently offer a 5+1 bulk deal. Buy five lowers and receive one lower free with no limit! If you buy 10 you get 12. If you buy 100 you get 20 free lowers!
    http://www.eparmory.com/product-p/buy5.htm
     
  11. jdbanks

    jdbanks New Member

    2
    0
    0
    EPARMORY EPLOWERS Customer Service

    Can't speak to the quality of the lowers yet, but I can tell you that I am completely unimpressed with the Customer Service I received from EPARMORY.COM regarding what should have been a simple issue. I would hate to think I had a problem with your product and had to go through your customer service again.
     
  12. Axxe55

    Axxe55 The Apocalypse Is Coming.....

    7
    1
    0
    maybe a little more details as to the problems you had with their customer service.
     
  13. jdbanks

    jdbanks New Member

    2
    0
    0
    Appears I am not the only one. Apparently their quality is also questionable. See this thread. Do not waste your money padding their pockets.
    http://www.calguns.net/calgunforum/showthread.php?t=840960
    My review of an EP Lower Poly 80%