Need help with me lee pro 1000

Discussion in 'Ammunition & Reloading' started by keas3, Dec 5, 2012.

  1. keas3

    keas3 New Member

    30
    0
    0
    The shell holder is not cyclin around correctly it is off just enough that the priming arm catches! Anyone know how I fix that problem?
     

    Attached Files:

  2. Tenderribbs

    Tenderribbs New Member

    317
    0
    0
    I just got my Lee master loader set up so I am not a pro yet by far, but mine had to be indexed by loosening the nut on bottom of handle . This made it align up when I rotated the shell holder , If I'm understanding the problem correctly .
     

  3. Rick1967

    Rick1967 Well-Known Member

    4,992
    51
    48
    There is a screw on the side on the bottom of the head that goes up and down. That screw adjusts the head back and forth to time it. It is on the left side near the front.
     
  4. keas3

    keas3 New Member

    30
    0
    0
    Thanks I did some research online and y'all are right it was the index screw! Now all I need is the proper shell plate that's in the mail and I'll be cranking out my .38 spec ammo again!!
     
  5. hnealg

    hnealg New Member

    80
    0
    0
    check out YouTube and Lee's website

    There are several videos on line that show the various adjustments on the Lee Pro (there are several)
    Also, there are some good tips/suggestions