Need help with Baby Browning

Discussion in 'General Handgun Discussion' started by rf100, Jun 7, 2009.

  1. rf100

    rf100 New Member

    10
    0
    0
    I recently acquired a Baby Browning 25 ACP. I fired it and it was in working order. Then I disassembled it, cleaned it and (thought I) successfully reassembled it.

    My problem is that the cocking indicator on the rear of the slide sticks out whether or not the gun is "cocked." Pulling the trigger does not release the firing pin. I have examined it over and over and I cannot figure out what is wrong.

    Can anyone help me with this?

    Thank you if you can.
     
  2. CA357

    CA357 New Member Supporter

    19,847
    3
    0
    First off, welcome here. Secondly, I don't know.

    I have a number of reference manuals which I check before I'll take an unfamiliar weapon down.

    That said, try google, that may give you some joy. If not, someone who can help should be along shortly.

    You may want to head over to the new members section and introduce yourself while you're waiting. :cool:
     

  3. seedy

    seedy Member

    132
    2
    18
    you might have installed the firing pin backwards.try turning it around.
     
  4. rf100

    rf100 New Member

    10
    0
    0
    Baby Browning fixed!

    Yes, I had the firing pin and the cocking indicater reversed on the spring.

    Feel like an idiot. Thanks for the help:)