Modifiable .22

Discussion in '.22 Rifle/Rimfire Discussion' started by jdsaler, Jul 30, 2007.

  1. jdsaler

    jdsaler New Member

    3
    0
    0
    I've seen one certain model of .22 that people really get into modding. What are some of the more popular .22 that people mod?
     
  2. BLS33

    BLS33 New Member Supporter

    607
    0
    0
    The Ruger 10/22.
     

  3. my21SF

    my21SF New Member

    7
    0
    0
    10-22

    the 10-22 is decently accurate out of the box,put a bull barrel and some trigger work on it and it is simply bada**
     
  4. NY Marksman

    NY Marksman New Member

    73
    0
    0
    You mean like this one (it's mine and lots investedf in it).

    [​IMG]
     
  5. BLS33

    BLS33 New Member Supporter

    607
    0
    0
    [​IMG]

    Now that's a beauty!
     
  6. Pounce

    Pounce New Member

    405
    0
    0
    It sure is a beaut!
    There is also a MG-42 kit you can get.
     
  7. Clayton

    Clayton New Member

    19
    0
    0
    The good thing about the 10/22 is the fact you can literally buy thousands of mods for it.

    The bad thing is, you have to change a fair bit of the original rifle to get a decent bit of kit.

    You could also look into the .22 AR15 market, There's plenty of cosmetic changes you can buy to make it look even better than they allready are, And most of them shoot o.k.

    Steve
     
    Last edited: Aug 29, 2007
  8. XrayShooter

    XrayShooter New Member

    1
    0
    0
    Glamour shot 10-22

    WOW! Please list the details!

    Thanks
     
  9. Pounce

    Pounce New Member

    405
    0
    0
    Where do you get one?
     
  10. NY Marksman

    NY Marksman New Member

    73
    0
    0
    Here is the list of what the rifle has. I put a new Leupold scope on it also.

    • S&K Ultra Walnut Extra Fancy stock, 1 inch recoil pad and laser engraved

    • Trigger Work by Randy at CPC
    o 2.0 - 2.4 lb trigger pull
    o Trigger and hammer side shims
    o Trigger over travel screw
    o Forward anti-creep/slack screw
    o Auto-bolt release conversion
    o Single stage pull reworked to be as crisp as possible
    o Oversize receiver pins installed to tighten trigger group
    o Extended magazine release installed

    Bolt Work by Randy at CPC
    o Bolt is totally disassembled, cleaned, deburred
    o Bolt face is surface ground and squared to .0425" LR rim headspace depth; same as bolt action rifle for accuracy and reduced flyers
    o Bolt side is beautifully prism jeweled
    o A hole is E.D.M.'ed and a stainless dowel pin pressed in over the front of the firing pin to hold it from raising up, reducing flyers and to get more consistent firing pin strikes.
    o Bolt buffer installed.

    • 20 inch black fade to gun metal gray compensated whistle Pig barrel.

    • Superior Tactical Ruger logo charging handle, rod and spring.

    • Leupold 3-9 X 33 EFR Gloss Black Scope

    Leupold Low height rings.


    [​IMG]
     
  11. Tilt

    Tilt New Member

    79
    0
    0
    WOW, that stock is sweeeeeettttt! Very nice.
     
  12. NY Marksman

    NY Marksman New Member

    73
    0
    0
    My newest baby

    Just finished this one in the last week or so.

    [​IMG]
     
  13. cpttango30

    cpttango30 New Member

    13,934
    3
    0
    Many people take the Remington 504 and order a new barrel from Kreiger or others.

    The 10/22 has the overall lead in the 22 modding department. I don't think there is another 22 on the market that even trys to come close to the 10/22 aftermarket.
     
  14. txdude321

    txdude321 New Member

    5
    0
    0
    Ruger 10/22 heres what I did to mine


    [​IMG]
     
  15. NY Marksman

    NY Marksman New Member

    73
    0
    0