mec-gar mags

Discussion in 'Semi-Auto Handguns' started by downsouth, Aug 31, 2012.

  1. downsouth

    downsouth New Member

    5,007
    3
    0
    I bought a mec-gar mag for the new CZspo1 tactical. It fits fine but will not drop free like the factory mags. Anybody used these mags before and what do you think about them.
     
  2. SundownRider

    SundownRider New Member

    2
    0
    0
    I've used them in my Beretta 92 and in my RIA 1911 9mm and in my Kimber 9mm. They've never let me down, and they've always fallen free. I use them in IDPA competition, so they'd better fall free.
     

  3. robocop10mm

    robocop10mm Lifetime Supporting Member Lifetime Supporter

    11,380
    1
    0
    Mec-Gar makes magazines for several gun makers. Most of their magazines work quite well.
     
  4. Overkill0084

    Overkill0084 Active Member

    4,910
    2
    38
    I've had great luck w/ MecGars. CZ75, Tangfoglio Witness, DW .40S&W 1911. All excellent. MecGar probably made your factory mags. There might be some odd aberration. Call MecGar CS and see what they can do for you.
     
  5. downsouth

    downsouth New Member

    5,007
    3
    0
    Thanks guys, I will keep my eyes open for more of them.
     
  6. russ

    russ New Member

    1,011
    0
    0
    None of my CZ75B mags drop free, including the 3 factory mags. I believe the 75B at least, is designed that way. If you check out the CZ-USA website and read descriptions, a few models specify "drop-free magazine" which would lead me to believe that other models aren't supposed to drop free.

    FWIW, the 3 Mec-Gar mags I have for my 75B are identical to the factory mags. I'm fairly certain the factory mags are made by Mec-Gar.
     
  7. sweeper22

    sweeper22 New Member

    2,706
    0
    0
    Mec-Gar (I wanna say they're somehow affiliated with Beretta) actually makes "factory" mags for a number of major names in the business...Sig, Beretta, CZ, some Browning and Ruger, and many others. Most of their "Mec-Gar" named mags are first rate and in my experience equal to factory mags.

    In some cases (possibly when they don't fill the factory mag contract) they're not so hot. I've heard their 1911 mags aren't so great, for example. But I've run Mec-Gar mags almost exclusively in my CZ 75b, BHP, and Sig P226 with nothing short of perfect results. And they all drop free just fine for me, except in a couple cases where the mag was of slightly higher than typical capacity.
     
  8. Oblivion9

    Oblivion9 New Member

    136
    0
    0
    Have an 18 rounder for my Beretta. Love it.