Firearms Talk banner
1 - 2 of 2 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter · #1 ·
Hi new to the forum, had a question about optimizing my trigger pull. I have a gen 3 glock 17 that I recently added a 4.5 tactical ghost trigger connector to. I also swapped my trigger set for the comp ghost spring set w/reduced pwr plunger spring, 6lb trigger spring and 6 lb firing pin spring. My trigger felt a little mushy on the pre travel but crisp on strike. Any ideas for making it feel tighter on the safety and pre travel, or do you think it may be a result of mismatched component? I also have a tungsten guide rod, Kim match barrel and titanium striker as well as firing pin safety.
 

·
Registered
Joined
·
50 Posts
Discussion Starter · #2 ·
Sorry, KKM barrel also threw in ghost maritime spring cups since my last range time. I was thinking about the glockworx duty tactical trigger bar as a quick fix but wanted to double check with people with more experience.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top