Kimber 45ACP Ammo Recomendations

Discussion in '1911 Forum' started by Codger, Sep 28, 2010.

  1. Codger

    Codger New Member

    5
    0
    0
    Just picked up an Ultra CDP II and looking for recommendations on best ammo
    for function and "social interaction" performance.

    Thanks for the feedback...
     
  2. lonyaeger

    lonyaeger New Member

    10,270
    0
    0
    For target shooting, I use Winchester white box. For personal defense, there are many options out there from Hornady, Corbon, and others. I keep mine loaded with Hornady TAP personal defense rounds.
     

  3. NGIB

    NGIB New Member

    7,143
    1
    0
    If it's a new gun, make sure to put some rounds through it and get it good and broken in. Also, most factory mags are but one step above junk so I'd invest in some Wilsons or Tripps. Also, the short barrel 1911s are especially hard on recoil springs - keep a few on hand...
     
  4. Codger

    Codger New Member

    5
    0
    0
    Thanks guys...

    Yeah, it's practically new and needs break-in. It came with a Kimpro tactical mag and a standard blued one. I'll probably get a couple CobraMags, and maybe conversion kits for these.

    Good tip on the recoil springs. I've heard good things about TAP, but pricey to practice with.
     
  5. 007BondJamesBond007

    007BondJamesBond007 New Member

    428
    0
    0
    45acp will work. A 308 or 9 mm will not fit. My Kimber will eat most 45acp ammo. You need to try to find what shoots best in your gun. Get different brands and try it out. Your practice ammo should be the same weight as your carry ammo.
     
  6. Codger

    Codger New Member

    5
    0
    0
    Thanks for the feedback. I'll break it in with hardball or equivalent and go from there. Most likely my carry round will be a HP that's as ball-like as possible. In a 3" barrel I doubt a whole lot of expansion is going to happen.

    I just added Crimson Trace LG-404 stocks last night - really nice. I have them on my S&W 442 & 66 (2.5") and they work great.
     
  7. NGIB

    NGIB New Member

    7,143
    1
    0
    Folks I know that have JHP "cranky" 1911s have had good success with Cor-bon Pow'r Ball...
     
  8. Dillinger

    Dillinger New Member

    23,972
    1
    0
    Codger - One of the toughest, and most common, questions we get in the shop is "what is the right ammo for my gun?"

    The best way to know is to shoot several different brands and see what the gun likes. I know that sounds odd, but most folks will tell you they have a gun that shoots Brand X really well, but it doesn't like Brand Y.

    For a carry gun, the most important thing is that it runs with 100% efficiency. I would try two or three different types of hollowpoint loads and see if there are any problems. When you find one that is reliable and you can group well with it, buy a couple of boxes from the same lot number and put them in the safe so you can rotate through your carry ammo over the upcoming months.

    For range plinking, I generally buy what is common and affordable. I tear the end off with the information and if the ammo doesn't run well, or doesn't group well, I keep it in my range bag so I know not to buy it again.

    That is a nice pistol you have there and I bet most brands will run just fine through it, but in the event you need it, you want to make sure that what you have fed it, while be able to get the job done. ;)

    JD
     
  9. Codger

    Codger New Member

    5
    0
    0
    Thanks Dillinger -very sound advice. Pretty much my feelings exactly and what I've done with my 1911s over the years.

    Since I've been out of the compact 1911 "world" since I sold my modded LW Colt Officer's ACP many years ago I'm trying to get back "up-to-speed" on ammo developments.

    Thanks to all for the useful feedback.
     
  10. cpttango30

    cpttango30 New Member

    13,934
    3
    0
    I will second the wilson mags. They are the best out there.