Internal work besides trigger

Discussion in 'Glock Forum' started by kiabe1, May 1, 2014.

  1. kiabe1

    kiabe1 New Member

    587
    0
    0
    Besides trigger work have you done anything internally to your glock?
     
  2. KG7IL

    KG7IL Well-Known Member

    3,155
    37
    48
    No. I once tried the Ghost 3.5, but I was not happy with it.

    I would like to try replacing the striker pre-cock mechanism with a full cock, FPS and a manual safety and see if that helps the crappy trigger.

    Something has to work. I did a complete swapout for a 1911.
     

  3. therukh

    therukh New Member

    361
    0
    0
    Glock Internals

    Depends on which Glock I'm talking about. I've done trigger work on all of them except my new G42 and I will do that soon. Other than that, I have polished all the internal parts that are metal, but all of those are parts of the ignition system so they are part of the "trigger" system. I replace the recoil springs every few thousand rounds but only with factory replacement parts. I bought a KKM barrel and had it threaded by AWC for my suppressor, but that's about it.
     
  4. Sgt_Skrb_25

    Sgt_Skrb_25 New Member

    1,983
    0
    0
    I ripped out all Glock components. I put in the Pyramid skelotonized striker with a 4lbs spring, titanium plunger and new spring, titanium guide rod, and new barrel. I replaced the trigger as well with a Pyramid. All pins, and extended all controls. I was never a fan of Glock ,so I figured if I got one, I would see if I can make it better. It feels like a different pistol all together now. ImageUploadedByFirearms Talk1419895514.642866.jpg ImageUploadedByFirearms Talk1419895522.587141.jpg ImageUploadedByFirearms Talk1419895531.128889.jpg ImageUploadedByFirearms Talk1419895539.171403.jpg ImageUploadedByFirearms Talk1419895547.056739.jpg