In need of Ejector Spring

Discussion in 'General Shotgun Discussion' started by jb8815, Mar 14, 2012.

  1. jb8815

    jb8815 New Member

    25
    0
    0
    I have a Winchester Ranger Model 120 12 gauge pump and the ejector broke. I am in need of purchasing one but have had no luck in finding one. Does anyone know a place that for sure will have one for sale? I am not familiar with Winchester so I am not even sure if another models ejector spring and screws will work. Any help?
     
  2. akers06

    akers06 New Member

    1,195
    0
    0
    Look up numrich gun parts they should have it.....I'm pretty sure that any 120, 1200, or 130 will fit it
     

  3. robocop10mm

    robocop10mm Lifetime Supporting Member Lifetime Supporter

    11,380
    1
    0
    The 120 and the 1200 use the same ejector. The 1300 is diferent. Numrich is a good source.
     
  4. akers06

    akers06 New Member

    1,195
    0
    0
    Ok I'm sorry I figured that the 1300 used the same spring lol sorry bout that
     
  5. robocop10mm

    robocop10mm Lifetime Supporting Member Lifetime Supporter

    11,380
    1
    0
    The 1200 uses as spring in the back of the receiver and a blind pin to retain the ejector. The 1300 uses a phillips screw to retain the two piece ejector. Both systems work well. The 1300 is probably easier to make.
     
  6. akers06

    akers06 New Member

    1,195
    0
    0
    Well I know now I guess you learn something new everyday lol
     
  7. jb8815

    jb8815 New Member

    25
    0
    0
    Thank you everyone. I will be checking into this.
     
  8. akers06

    akers06 New Member

    1,195
    0
    0
    Glad we could help man