How To Install a 3.5lb Connector?

Discussion in 'Glock Forum' started by Old-Fashioned, May 24, 2007.

  1. Old-Fashioned

    Old-Fashioned New Member

    5
    0
    0
    I just purchased a Glock disassembly tool and a 3.5 lb connector for my G17. Before I jump in to this project, I am curious to learn how difficult it is to make the trigger a 3.5 lb. pull as compared to the 5.5 lb.?
     
  2. jberry

    jberry New Member

    27
    0
    0
    connector change

    Takes about 5 minutes, tops; but, you really need pictures to go by. It's hard to describe...:)
    Here is a link, don't need to do the slide disassembly...and the responsibility is your own...http://www.alpharubicon.com/mrpoyz/glock/
     

  3. dglockster

    dglockster New Member

    68
    0
    0
    Old-Fashioned,
    If your username is accurate, you may like to have printed material to work from rather than a web site. If so, I recommend that you get the Patooma The Complete Glock® Reference Guide.

    It's available here: http://www.sportsmansguide.com/cb/cb.asp?a=148260 and probabely elsewhere as well.
     
  4. westernamerican

    westernamerican New Member

    42
    0
    0
    I second your recommendation. This is the best book on the market for GLOCK owners to have IMHO! :D