how to fix double fire on a IZH-27 EM 1C?

Discussion in 'Gunsmithing Forum' started by hunter95, Nov 11, 2011.

  1. hunter95

    hunter95 New Member

    5
    0
    0
    its been few days i bought izh27 from the 1st try it occured such issue
    i have cleaned it thoroughly but no changes

    suggestions are welcome
     
  2. pagj17

    pagj17 New Member

    2,455
    0
    0
    Disable it until you find a fix, a malfunction causing the gun to fire more than one round per trigger pull still counts as illegal.
     

  3. danf_fl

    danf_fl Retired Supporter

    12,369
    57
    48
  4. hunter95

    hunter95 New Member

    5
    0
    0
    obiviously thats not in use
    but i was finding a fixup?


     
  5. hunter95

    hunter95 New Member

    5
    0
    0
    one more question?
    I have opened its action for thoroughly cleaning
    is it still under warrunty?
     
  6. JonM

    JonM Moderator

    20,110
    19
    38
    not holding the trigger to the rear and only lightly pressing it will cause a over under or side by side to double with a single trigger. the issue is prolly your technique, especially if your new to double guns. basically you might be bump firing it.
     
  7. danf_fl

    danf_fl Retired Supporter

    12,369
    57
    48
    I was thinking originally along the lines of what JonM says first. But If you have a new firearm, get with the importer / manufacturer
     
  8. hunter95

    hunter95 New Member

    5
    0
    0
    i don't think
    If it was the problem then i have fired over 100 times with snaps not occured even once.
    im not new with guns but yes with single trigger
    I seriously doubt its mechanism malfunction, if i could have got the clue it was fun to play with,


     
    Last edited: Nov 11, 2011
  9. danf_fl

    danf_fl Retired Supporter

    12,369
    57
    48
    Snap caps don't have the recoil of the real thing.
    Different causes could be here. The mechanism is designed to allow only one barrel to fire, then the other.
    If the mechanism is not working correctly, then it needs to be fixed.
     
  10. hunter95

    hunter95 New Member

    5
    0
    0
    thats exactly im saying mechanism get disturb with recoil of cartridge
    On the other hand dry firing is smooth functioning
    Where in mechanism fault is? Maybe no one knows here like me.

    Thank you all for your inputs.
    K

     
  11. JonM

    JonM Moderator

    20,110
    19
    38
    have someone else try it. if it functions fine for them then its technique. if it still doubles get it fixed