Hollow points in Sig RCS/C3 Anyone with experience shooting hollow points in RCS or C3? I reload. Have tried three hollow point bullets, loaded to various lengths from 1.15" to 1.25"; all jam in the throat of my RCS. Also tried two type of commercial ammo - same problem. Feeding from the magazine appears normal/correct, they simply jam in the throat. It shoots round nose jacketed balls without failure. My other 1911s (one a Sig) feed nicely, although one required some experimentation to determine the COL it likes. This is a common problem with 1911s in general, usually fixed by a smith working on the feed ramp and throat (which I would prefer to avoid, due to cost and non-availability of a good smith locally). Comments / suggestions?